Outbound roule with more than 10 digit prepend

Discussion in '3CX Phone System - General' started by AldoLinares, Jan 10, 2008.

  1. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    I can't make this outbound rule.

    What i am trying to do is add there codes so they can speed dial by just pressing a 3 digit code and automatically calls a number that is 12 digit, this was working with the old Panasonic PBX.

    :( its there like a modification on ini or something.

    Thanks
     
  2. RobLloyd

    RobLloyd Member

    Joined:
    Oct 13, 2006
    Messages:
    488
    Likes Received:
    0
    If your speed dial is 2 digits then your prepend will add up to 12. If you can make your 2 digits dial work with the rest of your outbound rules.

    Don't strip off any digits either.
     
  3. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    Yea i got some (10) working like that and making the strip on two, but they need like 50 codes my workaround is that but with some codes for like 5 digits and not the 3 that they have.
     

Share This Page