Outgoing lines

Discussion in '3CX Phone System - General' started by George Georgiou, Apr 29, 2011.

Thread Status:
Not open for further replies.
  1. George Georgiou

    Joined:
    Jul 21, 2007
    Messages:
    22
    Likes Received:
    0
    With 3cx a Patton SmartNode 4960 E1, is there proper configuration, you are able to choose the exact line/port on which you want to dial out.
     
  2. davidbenwell

    davidbenwell Active Member

    Joined:
    Apr 27, 2010
    Messages:
    704
    Likes Received:
    0
    not used this one before, however from my understanding this is what you would need to do.


    1. If you have 4 PSTN lines, create 4 separate PSTN gateway links within 3CX
    2. Setup each line within the Patton SmartNode 4960 E1 web control pane,l match each 3CX PSTN Gateway extension
    3. Create individual outbound rules / inbound rules, to match your requirements for each PSTN extension
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.