Patton 4114 Configuration

Discussion in '3CX Phone System - General' started by swiftcom, Nov 27, 2007.

  1. swiftcom

    Joined:
    Aug 6, 2007
    Messages:
    5
    Likes Received:
    0
    Help: Using a Patton 4114 gateway.
    Lines all register, but when connecting to outside line the call does not go through. Any ideas?



    Config file below

    system

    ic voice 0
    low-bitrate-codec g729

    profile ppp default

    profile tone-set default

    profile voip default
    codec 1 g711alaw64k rx-length 20 tx-length 20
    codec 2 g711ulaw64k rx-length 20 tx-length 20

    profile pstn default

    profile sip default

    profile aaa default
    method 1 local
    method 2 none

    context ip router

    interface eth0
    ipaddress 192.168.10.10 255.255.255.0

    context cs switch
    no digit-collection timeout

    interface sip sipif0
    bind gateway sipgw0
    service default
    route call dest-service fxohuntgroup
    address-translation outgoing-call from-header user-part fix 10000 host-part local-ip

    interface sip sipif1
    bind gateway sipgw1
    service default
    route call dest-service fxohuntgroup
    address-translation outgoing-call from-header user-part fix 10001 host-part local-ip

    interface sip sipif2
    bind gateway sipgw2
    service default
    route call dest-service fxohuntgroup
    address-translation outgoing-call from-header user-part fix 10002 host-part local-ip

    interface sip sipif3
    bind gateway sipgw3
    service default
    route call dest-service fxohuntgroup
    address-translation outgoing-call from-header user-part fix 10003 host-part local-ip

    interface fxo fxoif0
    route call dest-interface sipif0
    disconnect-signal battery-reversal
    disconnect-signal busy-tone
    use profile tone-set default

    interface fxo fxoif1
    route call dest-interface sipif1
    disconnect-signal battery-reversal
    disconnect-signal busy-tone
    use profile tone-set default

    interface fxo fxoif2
    route call dest-interface sipif2
    disconnect-signal battery-reversal
    disconnect-signal busy-tone
    use profile tone-set default

    interface fxo fxoif3
    route call dest-interface sipif3
    disconnect-signal battery-reversal
    disconnect-signal busy-tone
    use profile tone-set default

    service hunt-group fxohuntgroup
    drop-cause normal-unspecified
    drop-cause no-circuit-channel-available
    drop-cause network-out-of-order
    drop-cause temporary-failure
    drop-cause switching-equipment-congestion
    drop-cause access-info-discarded
    drop-cause circuit-channel-not-available
    drop-cause resources-unavailable
    drop-cause user-busy
    route call 1 dest-interface fxoif0
    route call 2 dest-interface fxoif1
    route call 3 dest-interface fxoif2
    route call 4 dest-interface fxoif3

    context cs switch
    no shutdown

    gateway sip sipgw0
    bind interface eth0 router

    service default
    domain 192.168.10.2
    authentication 10000 password 10000 default
    default-server 192.168.10.2 loose-router
    registrar 192.168.10.2
    user 10000

    gateway sip sipgw0
    no shutdown

    gateway sip sipgw1
    bind interface eth0 router

    service default
    domain 192.168.10.2
    authentication 10001 password 10001 default
    default-server 192.168.10.2 loose-router
    registrar 192.168.10.2
    user 10001

    gateway sip sipgw1
    no shutdown

    gateway sip sipgw2
    bind interface eth0 router

    service default
    domain 192.168.10.2
    authentication 10002 password 10002 default
    default-server 192.168.10.2 loose-router
    registrar 192.168.10.2
    user 10002

    gateway sip sipgw2
    no shutdown

    gateway sip sipgw3
    bind interface eth0 router

    service default
    domain 192.168.10.2
    authentication 10003 password 10003 default
    default-server 192.168.10.2 loose-router
    registrar 192.168.10.2
    user 10003

    gateway sip sipgw3
    no shutdown

    port ethernet 0 0
    medium auto
    encapsulation ip
    bind interface eth0 router
    no shutdown

    port fxo 0 0
    use profile fxo us
    encapsulation cc-fxo
    bind interface fxoif0 switch
    no shutdown

    port fxo 0 1
    use profile fxo us
    encapsulation cc-fxo
    bind interface fxoif1 switch
    no shutdown

    port fxo 0 2
    use profile fxo us
    encapsulation cc-fxo
    bind interface fxoif2 switch
    no shutdown

    port fxo 0 3
    use profile fxo us
    encapsulation cc-fxo
    bind interface fxoif3 switch
    no shutdown
     

Share This Page