patton SN4552 don't drop call

Discussion in '3CX Phone System - General' started by ghibellino, Oct 10, 2007.

  1. ghibellino

    Joined:
    Oct 10, 2007
    Messages:
    2
    Likes Received:
    0
    I've configured a patton SN4552 as voip gateway for the 3cx server. Everything works. The IVR answer after 0 second and play the mesage, the problem is if the person who called drop the call the IVR still works and executes the step I planned on the time out action. It seems it doesn't recognise that the call is dropped and I don't know if I've to change the Patton configuration or the 3cx configuration.

    Thanks
     
  2. miraportuga

    miraportuga Member

    Joined:
    Aug 7, 2007
    Messages:
    297
    Likes Received:
    0
    Dont own a patton, but a Linksys SPA3102, since they are both Voice Gateways my guess is that you have to set the right disconnection tone for your line(i had to do this) check this site http://www.3amsystems.com/wireline/tone-search.htm and see if it helps you in anyway.

    Cheers
     
  3. nickybrg

    nickybrg Well-Known Member
    3CX Staff

    Joined:
    Jun 7, 2007
    Messages:
    1,618
    Likes Received:
    14
    Hi

    try an add the following line to the interface section

    early disconnect example :

    interface sip sipif2
    bind gateway sipgw2
    service default
    route call dest-service huntgrp0
    ##early disconnect##
    remote-party-id called-party
    address-translation outgoing-call request-uri user-part fix 10002 host-part to-header target-param none
    address-translation incoming-call called-e164 request-uri
     
  4. ghibellino

    Joined:
    Oct 10, 2007
    Messages:
    2
    Likes Received:
    0

Share This Page