Polycom 650 auto provisioning

Discussion in 'Windows' started by miro, Jun 4, 2012.

Thread Status:
Not open for further replies.
  1. miro

    Joined:
    Jan 17, 2012
    Messages:
    51
    Likes Received:
    0
    Hi,

    when i Provisioned my phone I always have two my own extension next to the blf buttons (e.g. 100), when I add "real" BFL buttons, they are created under the third and fourth button. How can I delete button 2. if my extension is 100 i want that on display is only one "100" al line 1

    thanks
     
  2. mixig

    mixig Active Member

    Joined:
    Dec 13, 2011
    Messages:
    519
    Likes Received:
    11
    Put the # like here, you can choose only your model to comment... "2" is representing line key 2
    <reg
    reg.1.address="%%extension_number%%"
    reg.1.auth.password="%%extension_auth_pw%%"
    reg.1.auth.userId="%%extension_auth_id%%"
    reg.1.displayName="%%extension_first_name%% %%extension_last_name%%"
    reg.1.lineKeys="1"
    # reg.1.lineKeys.SPIP320="2"
    # reg.1.lineKeys.SPIP321="2"
    # reg.1.lineKeys.SPIP330="2"
    # reg.1.lineKeys.SPIP331="2"
    # reg.1.lineKeys.SPIP335="2"
    # reg.1.lineKeys.SPIP450="2"
    # reg.1.lineKeys.SPIP550="2"
    # reg.1.lineKeys.SPIP560="2"
    # reg.1.lineKeys.SPIP650="2"
    # reg.1.lineKeys.SPIP670="2"
    reg.1.server.1.address="%%pbx_ip%%"
    reg.1.server.1.expires="900"
    reg.1.server.1.port="%%param::sipport%%"
    reg.1.server.1.register="1"
    />
     
  3. miro

    Joined:
    Jan 17, 2012
    Messages:
    51
    Likes Received:
    0
    Thank you very much, it works now.

    BR
     
Thread Status:
Not open for further replies.