Presence

Discussion in '3CX Phone System - General' started by felipeg007, Apr 19, 2017.

Thread Status:
Not open for further replies.
  1. felipeg007

    Joined:
    Jan 28, 2015
    Messages:
    18
    Likes Received:
    1
    Presence over a bridge(WAN) from 12.5 to 15 does not work. users on 12.5 cannot see users on the 15 system. Pretty disappointing for someone with 14 locations and over 1000 users.
     
  2. YiannisH_3CX

    YiannisH_3CX Support Team
    Staff Member 3CX Support

    Joined:
    May 10, 2016
    Messages:
    4,349
    Likes Received:
    274
    Hello @felipeg007

    Bridges between different PBX versions were never tested and we cannot guarantee the full functionality between them. I would recommend upgrading the 12.5 to v15 to have the full functionality between the bridges.
    Having said that make sure that you are using the correct presence ports on both sides. Also if you connecting them with using the FQDN's try using the Public IP to avoid any DNS issues.
     
Thread Status:
Not open for further replies.