Problem in connecting extension via vpn

Discussion in '3CX Phone System - General' started by rickburt, Nov 12, 2007.

  1. rickburt

    Joined:
    Nov 9, 2007
    Messages:
    4
    Likes Received:
    0
    Hello

    I have a problem with my extension in that when I try to ring either voice mail, an internal extension of voip provider I get a ringing tone but no audio when the call is answered.

    configuration is

    3cx phone system on a Windows 2003 SBS server on 192.168.0.10

    extension (either Grandstream 2000 or x-lite) on 192.168.24.6

    vpn link via Netgear 834 router.


    One thing I note is that the media server seems to be bound to the public IP address of the router that is local to it. Surely it should bind to the private address 192.168.0.10? I do not know where it's getting this public Ip address?

    I have enable and disabled the "extension is external", "bind to media server" and "supports re-invite" and the problem still occurs.

    Thanks

    Rick Burt


    The server log of a failed call is outlined below.

    08:01:46.296 MediaServerReporting::RTPReceiver [MS105000] Call(27) Ext.220: No RTP packets were received on 00000027@:remoteAddr=192.168.0.10:5004,extAddr=xxx.xxx.xxx.xxx:9060,localAddr=0.0.0.0:9060
    08:01:46.296 StratInOut::eek:nCancel [CM104009] Call(27): Call from Ext.220 to 333 has been terminated
    08:01:31.015 CallLegImpl::eek:nConnected [CM103001] Call(27): Created audio channel for Ext.220 (192.168.0.10:5004) with Media Server (212.159.70.171:9060)
    08:01:30.937 CallConf::eek:nIncoming [CM103002] Call(27): Incoming call from 220 (Ext.220) to sip:333@192.168.0.10
    08:01:18.203 ServRegs::eek:nAdd [CM113002] Registered: Ext.220
    08:01:17.734 ServRegs::eek:nRemoveAll [CM113004] Unregistered: Ext.220
     
  2. Mori

    Mori New Member

    Joined:
    Mar 23, 2007
    Messages:
    223
    Likes Received:
    0
    Hi.

    What version and build is your 3CX?

    Take a look at this as well.
    http://www.3cx.com/forums/categories-1/3cx-phone-system-general-1/how-to-make-extension-in-any-where-of-the-internet-2193/
     
  3. rickburt

    Joined:
    Nov 9, 2007
    Messages:
    4
    Likes Received:
    0
    3cx Version

    The version I am using is "3CX Phone System v3.1.2434.0"

    Thanks

    Rick
     
  4. Mori

    Mori New Member

    Joined:
    Mar 23, 2007
    Messages:
    223
    Likes Received:
    0
    Re: 3cx Version

    VPN is not supported yet.
    http://www.3cx.com/forums/categories-1/3cx-phone-system-general-1/3cx-phone-system-v4-0---alpha-version---available-2812/

    (anybody correct me if im wrong :p )
     
  5. alicic

    alicic New Member

    Joined:
    Oct 3, 2007
    Messages:
    119
    Likes Received:
    0
    how vpn is not supported.

    It is, I register my X-Lite through VPN and use services of 3cx Phone system
     
  6. Mori

    Mori New Member

    Joined:
    Mar 23, 2007
    Messages:
    223
    Likes Received:
    0
    Then im wrong. :)

    Just know that VPN will be available in v.4..
     
  7. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    Hi rickburt,

    It seems you activated stun at your "Grandstream 2000 or x-lite". For all SIP clients under VPN connected to 3CX BOX or any IPPBX need not activate the STUN. Please check both of them if found enable of stun, try disable it.
     

Share This Page