Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Problem with Outlook and 3CX asst

Discussion in '3CX Phone System - General' started by jmatson, Dec 23, 2009.

Thread Status:
Not open for further replies.
  1. jmatson

    jmatson New Member

    Joined:
    Nov 30, 2009
    Messages:
    122
    Likes Received:
    0
    I am trying to use outlook to call a Number in the 813 area code. i'm in the 318 area code.

    but it's dialing some local number.

    Here are the logs

    15:48:59.265 [CM503008]: Call(244): Call is terminated
    15:47:45.493 [MS210001] C:244.3:Answer received. RTP connection[unsecure]: 10.1.10.33:16460(16461)
    15:47:45.492 Remote SDP is set for legC:244.3
    15:47:45.399 [CM503007]: Call(244): Device joined: sip:10000@10.1.10.16:5062
    15:47:45.396 [MS210002] C:244.3:Offer provided. Connection(transcoding mode): 74.93.147.249:7026(7027)
    15:47:45.392 [MS210001] C:244.4:Answer received. RTP connection[unsecure]: 10.1.10.16:16466(16467)
    15:47:45.390 Remote SDP is set for legC:244.4
    15:47:45.390 [CM505002]: Gateway:[ATT] Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-3.3.6(GW)] PBX contact: [sip:10000@74.93.147.249:5060]
    15:47:45.388 [CM503002]: Call(244): Alerting sip:10000@10.1.10.16:5062
    15:47:45.309 [CM503025]: Call(244): Calling PSTNline:813775XXXX@(Ln.10000@ATT)@[Dev:sip:10000@10.1.10.16:5062]
    15:47:45.306 [MS210002] C:244.4:Offer provided. Connection(transcoding mode): 74.93.147.249:7028(7029)
    15:47:45.264 [CM503004]: Call(244): Route 2: VoIPline:813775XXXX@(Ln.10001@888Voip)@[Dev:sip:jessandbetty@cogentvoip.com:5060]
    15:47:45.264 [CM503004]: Call(244): Route 1: PSTNline:813775XXXX@(Ln.10000@ATT)@[Dev:sip:10000@10.1.10.16:5062]
    15:47:45.251 [CM503010]: Making route(s) to <sip:+1813775XXXX@127.0.0.1:5060>
    15:47:45.248 Refer: from="MakeCall"<sip:MakeCall@127.0.0.1:5060>;tag=e374427f; to="318891XXXX"<sip:100@127.0.0.1:5060>;tag=c35c472b; RefTo=<sip:+181377XXXX@127.0.0.1:5060>
    15:47:45.034 [MS210003] C:244.1:Answer provided. Connection(transcoding mode[unsecure]):127.0.0.1:7022(7023)
    15:47:45.033 [MS210001] C:244.3:Answer received. RTP connection[unsecure]: 10.1.10.33:16460(16461)
    15:47:45.031 Remote SDP is set for legC:244.3
     
  2. jmatson

    jmatson New Member

    Joined:
    Nov 30, 2009
    Messages:
    122
    Likes Received:
    0
    Problem Fixed. With Outbound rules
     
Thread Status:
Not open for further replies.