Programming VM button to include userid?

Discussion in '3CX Phone System - General' started by RobLloyd, Jul 23, 2007.

  1. RobLloyd

    RobLloyd Member

    Joined:
    Oct 13, 2006
    Messages:
    488
    Likes Received:
    0
    Is there a way to program the VM button on the phones to include 999 wait a bit and then dial the VM box #? I'm using SPA-942 phones if that helps any.
    I tried putting in 999,100 but that didn't do anything. I would like to program it so it all you have to do is enter the password.

    Thanks,
     
  2. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    The current version should be unable to do this option. This post may to post at Feature requests.
     
  3. SY

    SY Well-Known Member
    3CX Support

    Joined:
    Jan 26, 2007
    Messages:
    1,821
    Likes Received:
    1
    If you configure you phone to dial 999 then send DTMFs corresponding to extension number and PIN (as requested by Voice Mail DR), it will work. Unfortunately, it doesn't supported by all phones :(
     
  4. philip

    Joined:
    Jul 25, 2007
    Messages:
    5
    Likes Received:
    0
    it would be much better is the server would accept a call into the VM system from an extension without requiring the extension number. this is how almost all other voip pbx systems work.
     
  5. RobLloyd

    RobLloyd Member

    Joined:
    Oct 13, 2006
    Messages:
    488
    Likes Received:
    0
    That would work too.

     

Share This Page