Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Rebound on V9

Discussion in '3CX Phone System - General' started by pjr, Dec 3, 2010.

Thread Status:
Not open for further replies.
  1. pjr

    pjr New Member

    Joined:
    Oct 5, 2009
    Messages:
    154
    Likes Received:
    0
    Hi,

    We have just setup our first v9 server and are testing the rebound feature.

    I have it setup as follows

    Internal extension 5002 setup to forward unanswered calls after 2 seconds to an external mobile number.

    Ext 5002 also has call screening enabled.

    If I call the internal extension of 5002 or it's DDI, It rings briefly before I get asked to record my name and press any key, I then get told the PBX is trying to locate 5002 - as I would expect.

    The mobile that's configured to receive the forwarded calls from 5002 rings but the message from the PBX is just the callers phone number ID, and not the name greeting that was recorded?

    How do we get this feature working?

    Also, if the user 5002 has a personal identification message recorded does the the voice prompt the caller hears, change from saying, please wait whilst we try to locate "5002", to play the users personal identification message instead?

    Thanks

    Paul
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. MichaelB

    MichaelB Member
    3CX Support

    Joined:
    Aug 25, 2009
    Messages:
    407
    Likes Received:
    8
    Hi, Please update your system prompts and try again.
    If problem persists - restart your web server and try again.
    Thanks and Regards
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. pjr

    pjr New Member

    Joined:
    Oct 5, 2009
    Messages:
    154
    Likes Received:
    0
    System prompts were out of date - now updated.

    Entire server restarted and the issue remains.

    Thanks

    Paul
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. MichaelB

    MichaelB Member
    3CX Support

    Joined:
    Aug 25, 2009
    Messages:
    407
    Likes Received:
    8
    Delete then that Prompt - and download it again.
    Restart Web server there is no need to restart all machine.

    If problem persist contact me mb@3cx.com
    Thanks
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  5. pjr

    pjr New Member

    Joined:
    Oct 5, 2009
    Messages:
    154
    Likes Received:
    0
    Which prompt do i need to delete and where would I find it?

    Thanks
    Paul
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  6. MichaelB

    MichaelB Member
    3CX Support

    Joined:
    Aug 25, 2009
    Messages:
    407
    Likes Received:
    8
    Hi, are you using the Standard English prompt?

    Go to IVR/Prompts/Sets/ResponseOrdering.vxml
    It should be like this -

    <?xml version="1.0" encoding="utf-8"?>

    <IVROrderSet culture="jp">

    <response name="QUEINTRO" order="YOUR_AT_POSITION+$Num$+QUEUE_TOBE_CONNECTED" />
    <response name="VMDATETIME" order="TIME_IS+$Date$+EMPTY+$Time$" />
    <response name="VMCALLER" order="MSG_FROM+$PhoneNum$" />
    <response name="VMMSGDEL" order="$Num$+$Messages$+DELETED" />
    <response name="VMRECINTRO" order="RECYA+$Prompt$+THENPRESPND+BEEP" />
    <response name="EXTNUMBER" order="PLSENTER+EXTNUM" />
    <response name="ENTERPIN" order="PLSENTER+PIN+THENPRESPND" />
    <response name="ENTERNEWPIN" order="PLSENTER+NEW_PIN_CODE+THENPRESPND" />
    <response name="YOURNEWPIN" order="YOUR+NEW_PIN_CODE+IS+$PIN$" />
    <response name="PINCONFIRM" order="TO_SAVE+CONFIRM" />
    <response name="MENUENTRY" order="PRESSSTAR_TOPLAY+PRESSNINE_FOROPTIONS+TOEXIT_PRESSPOUND" />
    <response name="DIALOUT" order="PLSENTER+NUMBER_ENT+THENPRESPND" />
    <response name="NEWSELFID" order="TORECNEW+MSG_SELFID+MSGREC_MNU2" />
    <response name="NEWGREETING" order="TORECNEW+MSG_GRT+MSGREC_MNU" />
    <response name="ENTERUSERNAME" order="PLSENTER+USER_NAME" />
    <response name="BOOMGREET" order="PLSWAITLOCATE+$PhoneNum$" />
    <response name="BOOMACCEPTGREET"
    order="UHVCALL+$VMAILAUDIO$+$PhoneNum$+EMPTY+PRESS1TOTAKECALL+EMPTY+PRESSSENDTOVMAIL" />
    <response name="BOOMNOTLOCATED" order="USERUNAVAIL+REDIRVMAIL" />
    <response name="PROFSTATUSOPT" order="STATUS_MENU" />

    </IVROrderSet>

    Thanks
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. nb

    nb Support Team
    Staff Member 3CX Support

    Joined:
    Jun 7, 2007
    Messages:
    2,153
    Likes Received:
    170
    HI We made some changes to the prompts.

    Download the system prompt you are using one final time and try this again - we found an issue in other languages.

    Can you let us know which system voice prompt language you are using?

    If a fresh download does not fix the problem, restart the webserver or restart the machine quickly and your problem should be resolved + the call screening prompt will be played.

    Thanks
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  8. brianlgrimm

    Joined:
    Dec 17, 2010
    Messages:
    19
    Likes Received:
    0
    I would like this as well.

    In looking at ResponseOrdering.vxml, it appears that this line controls this:
    <response name="BOOMGREET" order="PLSWAITLOCATE+$PhoneNum$" />

    What variable can I replace $PhoneNum$ with that would play the recorded self identification message instead?
     
Thread Status:
Not open for further replies.