Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Receiving fax with Windows Server 2003 Fax Services

Discussion in '3CX Phone System - General' started by kleon, May 11, 2010.

Thread Status:
Not open for further replies.
  1. kleon

    Joined:
    Apr 8, 2010
    Messages:
    9
    Likes Received:
    0
    I setup my 3cx with Linksys 3102 as the tutorial .
    Made a extension (118 as the tutorial) ive managed successfully to receive fax on an external fax machine , but when i connect the ata port to a modem attached to my windows server 2003 , the extension forwards the fax call to server , the call was answered but after 2-3 seconds , the call is terminated.

    Please advice ,

    thank you!



    Here is the log:
    15:24:17.531 [CM503008]: Call(5): Call is terminated
    15:24:08.578 Active calls counted toward license limit: [5]
    15:24:06.281 [CM503007]: Call(5): Device joined: sip:118@192.168.1.120:5060
    15:24:02.359 [CM505001]: Ext.118: Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-5.1.10(GW)] PBX contact: [sip:118@192.168.1.100:5060]
    15:24:02.359 [CM503002]: Call(5): Alerting sip:118@192.168.1.120:5060
    15:24:02.328 [CM503025]: Call(5): Calling Ext:Ext.118@[Dev:sip:118@192.168.1.120:5060]
    15:24:02.234 [CM503004]: Call(5): Route 1: Ext:Ext.118@[Dev:sip:118@192.168.1.120:5060]
    15:24:02.234 [CM503010]: Making route(s) to <sip:118@127.0.0.1:5060>
    15:24:02.234 [CM505002]: Gateway:[SPA-3102] Device info: Device Identified: [Man: Linksys;Mod: SPA Series;Rev: General] Capabilities:[reinvite, no-replaces, able-no-sdp, recvonly] UserAgent: [Linksys/SPA3102-5.1.10(GW)] PBX contact: [sip:10002@192.168.1.100:5060]
     
  2. kleon

    Joined:
    Apr 8, 2010
    Messages:
    9
    Likes Received:
    0
    Anybody Please??
     
Thread Status:
Not open for further replies.