Remote Linksys 3102 to 3CX over Internet

Discussion in '3CX Phone System - General' started by bhavank, Oct 15, 2007.

Thread Status:
Not open for further replies.
  1. bhavank

    bhavank New Member

    Joined:
    Apr 24, 2007
    Messages:
    109
    Likes Received:
    0
    hi
    i would recommend you to give live ip to 3CX server system directly and then try and connect the linksys device.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    SIP gateway over internet should be not recommended. Using VPN tunnel will make you completed the task within few mins.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. zensoftware

    zensoftware New Member

    Joined:
    Aug 23, 2007
    Messages:
    225
    Likes Received:
    0
    We are curently setting up a Linksys 3102 over an IPSEC VPN. IP wize 3CX can ping the linksys on the routed internal IP. Is it ok for a Gateway to be on a network behind a router/VPN. I know there was an issue with patton gateways having to be on the local subnet?

    Cheers

    Neil
     
  4. 5qg4

    5qg4 Active Member

    Joined:
    Jan 31, 2007
    Messages:
    643
    Likes Received:
    0
    Different SIP gateway have different behavior. And different VPN gateway have different behavior too.

    We have tested following VPN tunnel:
    Netscreen NS25 <--- IPSEC VPN ---> Draytek 2950

    Netscreen 5XP <--- IPSEC VPN ---> Draytek 2950

    Draytek 2200E+ <----- PPTP VPN ----> Draytek 2950

    Linksys VPN <--- IPSEC VPN ---> Draytek 2950

    ZyXel VPN <--- IPSEC VPN ---> Draytek 2950

    All should be fine for remote SIP gateway. We only found Weltech WG3804A one way audio under Netscreen 5XP <--- IPSEC VPN ---> Draytek 2950. However, replaced GXW4104 or MP-114 are works fine. It should be the WG3804A's issue. For Patton also works fine, we already tested SN4960 T1/E1/PRI/30V. SN41XX FXO will be test later.

    I prefer Patton's voice quality. However, the config should be not easy.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.