Send call to an endpoint directly (not register)

Discussion in '3CX Phone System - General' started by xc99tour, Jan 28, 2007.

  1. xc99tour

    Joined:
    Jan 2, 2007
    Messages:
    37
    Likes Received:
    0
    I would like to define an extension that I can send calls to without having to register it. I.E. 3CX would just send an invite to 1234@192.168.0.5 without having to first register the extension. Is that possible?

    Thanks,

    Larry
     
  2. archie

    archie Well-Known Member
    3CX Staff

    Joined:
    Aug 18, 2006
    Messages:
    1,309
    Likes Received:
    0
    Currently, it's not possible, because there's no way to speify IP of extension from web-interface. It could be acquired only by registration.
     
  3. xc99tour

    Joined:
    Jan 2, 2007
    Messages:
    37
    Likes Received:
    0
    Register a trusted source

    I have an endpoint that can register but is not capable of authincation. Is there any way to accept a registration without requiring authincation?

    Thanks,

    Larry
     
  4. archie

    archie Well-Known Member
    3CX Staff

    Joined:
    Aug 18, 2006
    Messages:
    1,309
    Likes Received:
    0
    Re: Register a trusted source

    Yes. Just make blank Password field in Authentication section of Edit extension screen.
     
  5. xc99tour

    Joined:
    Jan 2, 2007
    Messages:
    37
    Likes Received:
    0
    No luck

    I thought of that and tried it again after reading your suggestion. Did not work. When I set up the ext. I did it with out an auth name and password. Then tried putting the ext. number in the name, blanking out the password. did not work either.

    What can I send you do document this?

    Larry

    Frame 38 (425 bytes on wire, 425 bytes captured)
    Ethernet II, Src: DellPcba_2b:6f:99 (00:0d:56:2b:6f:99), Dst: DellComp_0b:d0:25 (00:08:74:0b:d0:25)
    Internet Protocol, Src: 192.168.0.5 (192.168.0.5), Dst: 192.168.0.3 (192.168.0.3)
    User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 5060 (5060)
    Session Initiation Protocol
    Request-Line: REGISTER sip:192.168.0.3 SIP/2.0
    Method: REGISTER
    [Resent Packet: False]
    Message Header
    From: <sip:300@192.168.0.3:5060>;tag=ds-67f5-254f5617
    SIP from address: sip:300@192.168.0.3:5060
    SIP tag: ds-67f5-254f5617
    To: <sip:300@192.168.0.3:5060>
    SIP to address: sip:300@192.168.0.3:5060
    Call-ID: b35c1ce7-afce-11db-a5e7-ad26eb022f44@voip
    CSeq: 337 REGISTER
    Content-Length: 0
    Expires: 3600
    Contact: <sip:300@192.168.0.5:5060>;expires=3600
    Contact Binding: <sip:300@192.168.0.5:5060>;expires=3600
    URI: <sip:300@192.168.0.5:5060>
    Via: SIP/2.0/UDP 192.168.0.5:5060;branch=z9hG4bKb35c1ce9-afce-11db-9bd2-87b9f7103cec
    Transport: UDP
    Sent-by Address: 192.168.0.5
    Sent-by port: 5060
    Branch: z9hG4bKb35c1ce9-afce-11db-9bd2-87b9f7103cec
    Max-Forwards: 70

    No. Time Source Destination Protocol Info
    39 8.815899 192.168.0.3 204.174.223.59 POP Request: USER crossroadscy05

    Frame 39 (75 bytes on wire, 75 bytes captured)
    Ethernet II, Src: DellComp_0b:d0:25 (00:08:74:0b:d0:25), Dst: Symantec_b5:9c:96 (00:a0:65:b5:9c:96)
    Internet Protocol, Src: 192.168.0.3 (192.168.0.3), Dst: 204.174.223.59 (204.174.223.59)
    Transmission Control Protocol, Src Port: 4861 (4861), Dst Port: pop3 (110), Seq: 1, Ack: 48, Len: 21
    Post Office Protocol

    No. Time Source Destination Protocol Info
    40 8.903494 192.168.0.3 192.168.0.5 SIP Status: 407 Proxy Authentication Required (0 bindings)

    Frame 40 (510 bytes on wire, 510 bytes captured)
    Ethernet II, Src: DellComp_0b:d0:25 (00:08:74:0b:d0:25), Dst: DellPcba_2b:6f:99 (00:0d:56:2b:6f:99)
    Internet Protocol, Src: 192.168.0.3 (192.168.0.3), Dst: 192.168.0.5 (192.168.0.5)
    User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 5060 (5060)
    Session Initiation Protocol
    Status-Line: SIP/2.0 407 Proxy Authentication Required
    Status-Code: 407
     

Share This Page