Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Set DTMF Type setting using Yealink Template

Discussion in '3CX Phone System - General' started by jhicken, Jun 15, 2011.

Thread Status:
Not open for further replies.
  1. jhicken

    Joined:
    May 21, 2010
    Messages:
    25
    Likes Received:
    0
    I am trying to figure out how to hard set the DTMF Type to INBAND using the Yealink Phone Template.

    The template currently has these settings for DTMF:

    [ DTMF ]
    path = /config/voip/sipAccount0.cfg
    DTMFInbandTransfer = 1
    InfoType = 0
    DTMFPayload = 101

    A new T28P model with this setting has the Type set to RFC2833

    I can manually change it from RFC2833 (which doesn't work very well working with a lot of systems that requires tones to work properly such as Call Conferencing systems) but I don't want to do that on 160 phones.

    Any ideas on what I need to change in the template?

    Thanks!
     
  2. willow

    willow Member

    Joined:
    Mar 1, 2011
    Messages:
    471
    Likes Received:
    0
    when I did an export of DTMf set to RFC I get this:
    [ DTMF ]
    DTMFInbandTransfer = 1
    DTMFPayload = 101
    DTMFToneLen = 300
    InbandDtmfVolume = 0
    RxLatency = 20
    CPTToneCountry = 12
    G726CodeWord = 1
    InfoType = 0
    InfoTypeOEM = 0



    When I did an export of DTMF set to Inband I get this

    [ DTMF ]
    DTMFInbandTransfer = 0
    DTMFPayload = 101
    DTMFToneLen = 300
    InbandDtmfVolume = 0
    RxLatency = 20
    CPTToneCountry = 12
    G726CodeWord = 1
    InfoType = 0
    InfoTypeOEM = 0


    so it appears that inband is 0, RFC=2833 is 1 and sip info is 2.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. willow

    willow Member

    Joined:
    Mar 1, 2011
    Messages:
    471
    Likes Received:
    0
    when I did an export of DTMf set to RFC I get this:
    [ DTMF ]
    DTMFInbandTransfer = 1
    DTMFPayload = 101
    DTMFToneLen = 300
    InbandDtmfVolume = 0
    RxLatency = 20
    CPTToneCountry = 12
    G726CodeWord = 1
    InfoType = 0
    InfoTypeOEM = 0



    When I did an export of DTMF set to Inband I get this

    [ DTMF ]
    DTMFInbandTransfer = 0
    DTMFPayload = 101
    DTMFToneLen = 300
    InbandDtmfVolume = 0
    RxLatency = 20
    CPTToneCountry = 12
    G726CodeWord = 1
    InfoType = 0
    InfoTypeOEM = 0


    so it appears that inband is 0, RFC=2833 is 1 and sip info is 2.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. jhicken

    Joined:
    May 21, 2010
    Messages:
    25
    Likes Received:
    0
    Awesome!

    That should be exactly what I need!

    Thanks man!

    :D
     
Thread Status:
Not open for further replies.