Setting Up QOS

Discussion in '3CX Phone System - General' started by qlxltd, May 16, 2009.

Thread Status:
Not open for further replies.
  1. qlxltd

    Joined:
    Nov 3, 2008
    Messages:
    25
    Likes Received:
    0
    Im trying to understand the correct way to set up QOS on our routers. This is what I have done and I'm wanted to know if its correcty done?

    We have 3cx running on local address 10.14.3.8

    The router (Draytek Vigor 2800) is configured to the following open ports.

    TCP 5060 - 5060
    UDP 5060 - 5061
    TCP 5090
    UDP 9000 - 9015

    [​IMG]

    The QOS Settings are set to 97% priority for the 3cx system

    [​IMG]

    And in the Advanced Setup I created 3 rules

    [​IMG]

    I have also changed the local address to "ANY" from "10.14.3.8" as we have remote extensions at other sites via OpenVPN
     
  2. qlxltd

    Joined:
    Nov 3, 2008
    Messages:
    25
    Likes Received:
    0
    Just realised that traffic on the OpenVPN connection port 1195 for the remote extensions are not covered by the QOS

    I guess I need 2 OpenVPN connections with one for Voip and the other for data and then add the Voip OpenVPN port number to the QOS port range.
     
Thread Status:
Not open for further replies.