Setup incomming fax

Discussion in '3CX Phone System - General' started by sunero, Nov 20, 2008.

Thread Status:
Not open for further replies.
  1. sunero

    Joined:
    Jul 7, 2008
    Messages:
    11
    Likes Received:
    0
    Hi,

    I'm trying to setup incomming fax over my AudioCodes Mediant 1000 (PSTN), but without luck.

    The following is what i'm getting from the log :

    15:42:22.354 MediaServerReporting::RTPReceiver [MS105000] C:67.2: No RTP packets were Received:remoteAddr=192.168.12.71:10012,extAddr=0.0.0.0:0,localAddr=192.168.12.71:7408
    15:42:22.354 Call::Terminate [CM503008]: Call(67): Call is terminated
    15:42:22.308 LineCfg::getInboundTarget [CM503012]: Inbound office hours' rule for DID:208701 forwards to Fax:888
    15:42:22.308 LineCfg::getInboundTarget [CM503009]: DID rule (208701) is applied to call from sip:0044132xxx6815@sip.apollon.dk:5060 to xx208701

    Do I need to setup anything in my AudioCodes?

    And is there a way to test my 3CX fax internally just by sending a fax job directly to the fax number 888?
     
Thread Status:
Not open for further replies.