SIP TAPI Outlook and 3CX

Discussion in '3CX Phone System - General' started by adetterer, Nov 5, 2007.

  1. adetterer

    Joined:
    Aug 28, 2007
    Messages:
    22
    Likes Received:
    0
    I've installed SIP TAPI for outlook dialing and it seems to "try" and call however the call doesn't go through.

    The log is as follows:

    18:38:01.663 CallConf::eek:nIncoming [CM003002] Call(131): Destination not available for call from sip:100@10.1.1.199 to sip:100@10.1.1.199

    18:38:01.663 CallConf::Rejected [CM103005] Call(131) is rejected: Destination does not exist, or is not registered

    18:38:01.616 CallConf::eek:nIncoming [CM103002] Call(131): Incoming call from 100 (Ext.100) to sip:100@10.1.1.199

    Any ideas???
     
  2. weebnuts

    Joined:
    Sep 13, 2007
    Messages:
    38
    Likes Received:
    1
    check your windows dialing properties. It may be calling something with or without the desired prefixes.
     
  3. adetterer

    Joined:
    Aug 28, 2007
    Messages:
    22
    Likes Received:
    0
    Tried that.
     
  4. weebnuts

    Joined:
    Sep 13, 2007
    Messages:
    38
    Likes Received:
    1
    is that extension 100 a hard phone? it looks like its saying it is not registered, make sure that is the phone you want the call to come thru on.
     
  5. Hcuk

    Joined:
    Nov 12, 2007
    Messages:
    11
    Likes Received:
    0
    I get the same thing.

    Any ideas how to get this to work?

    Thanks
     

Share This Page