SIPPHONE / UTSTARCOMM F3000 WORKING GREAT

Discussion in '3CX Phone System - General' started by mrmmd4988, Feb 27, 2007.

  1. mrmmd4988

    Joined:
    Feb 27, 2007
    Messages:
    3
    Likes Received:
    0
    I set up my installation with my Sipphone.com account and then purchased a virtual number. I also registered my new wireless UTStarcomm F3000 phone as an extension. All seems to work well of what I have tried so far.

    My question is how do I check voicemail from an extension? I do receive a wave attachment from my Exchange server which is nice.

    Thanks
     
  2. Costas3CX

    Costas3CX New Member

    Joined:
    Jan 23, 2007
    Messages:
    217
    Likes Received:
    0
    To access you voicemail you need to dial 999 from any extension, then you will be asked the extension number that you wish to access voicemail to. Then the PIN configured for that extension. After you do this, you are now in the voicemail menu.

    Have in mind that in the configuration page for that particular extension, the voicemail must be enabled.There is a Voice Mail Configuration part for every extension and this must be configured appropriately.

    Also have in mind that in the General Settings page, you must provide the pbx with the IP or FQDN of your email server to handle the vmail being attached to an email.
     

Share This Page