SPA-3102 Disconnect Tone dont work

Discussion in '3CX Phone System - General' started by AldoLinares, Nov 17, 2007.

Thread Status:
Not open for further replies.
  1. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    I am trying to configure disconnect tone on my SPA-3102, its supposed to be like this:

    425@-30,425@-30;1(.25/.25/1+2)

    I configure it and dont work.

    I am located in mexico.

    Thanks
     
  2. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    Here is my log

    05:44:18.859 StratInOut::eek:nHangUp [CM104007] Call(41): Call from Ln:10001@Telnor (7008110) to 801 has been terminated by Ln:10001@Telnor (7008110); cause: BYE; from IP:172.16.4.200
    05:43:16.984 CallConf::eek:nProvisional [CM103003] Call(41): Ext.102 is ringing
    05:43:11.343 MediaServerReporting::DTMFhandler [MS211000] Call(41) Ln:10001@Telnor (7008110): DTMF (RTP) from 172.16.4.200:16432 arrived. in-band DTMF tone detection is turned off.
    05:43:08.343 CallLegImpl::eek:nConnected [CM103001] Call(41): Created audio channel for Ln:10001@Telnor (7008110) (172.16.4.200:16432) with Media Server (172.16.4.90:7412)
    05:43:08.328 CallConf::eek:nIncoming [CM103002] Call(41): Incoming call from 10001 (Ln:10001@Telnor (7008110)) to sip:%3C10001@172.16.4.90
     
  3. AldoLinares

    AldoLinares New Member

    Joined:
    Nov 12, 2007
    Messages:
    135
    Likes Received:
    0
    The TONE FOR MEXICO IS:

    425@-30,425@-30;2(.32/.32/1+2)

    It's working right now
     
Thread Status:
Not open for further replies.