Switch from Internal IP to Internal FQDN

Discussion in '3CX Phone System - General' started by Frank86, Mar 11, 2018.

Thread Status:
Not open for further replies.
  1. Frank86

    Joined:
    Jan 18, 2018
    Messages:
    33
    Likes Received:
    2
    Is it possible to switch from internal IP to internal FQDN without reinstalling 3CX?
     
  2. eddv123

    eddv123 Active Member

    Joined:
    Aug 15, 2017
    Messages:
    916
    Likes Received:
    141
    Hi Frank86,

    You can now change private IP's without having to re-install, but I have seen nothing to support that you can change from private IP to FQDN without a re-install, so I think you still need to do this.

    Also you must ensure that you have a manageable DNS server on your local LAN subnet to support the domain name to private IP either Windows DNS or Firewall/Router.
     
  3. Saqqara

    Saqqara Active Member

    Joined:
    Mar 12, 2014
    Messages:
    877
    Likes Received:
    135
    Yes, you can if you installed the software using an internal DNS

    Make sure your internal fqdn resolves to your 3cx server
    Edit each phone, under 'Phone provisioning' change 'Select interface' to your fqdn

    If you selected internal IP address, when installing then it will require a reinstall
     
    #3 Saqqara, Mar 11, 2018
    Last edited: Mar 11, 2018
  4. Frank86

    Joined:
    Jan 18, 2018
    Messages:
    33
    Likes Received:
    2
    Thank you. I'll reinstall it.
     
Thread Status:
Not open for further replies.