Tagging external lines to Linksys SPA962 with SPA932

Discussion in '3CX Phone System - General' started by shannon, Jun 2, 2009.

Thread Status:
Not open for further replies.
  1. shannon

    Joined:
    May 21, 2009
    Messages:
    6
    Likes Received:
    0
    Hi all have a question relating to the Linksys SPA962 with SPA932, I would like to assign my external lines (PSTN) to the buttons one the SPA932 so the operator would know if the lines are in uses and would also be able to select a particular line to make calls. Is this possible with 3cx and these phones? Thanks again
     
  2. radcomp

    Joined:
    Aug 21, 2008
    Messages:
    35
    Likes Received:
    0
    Any Luck on this
     
  3. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,878
    Likes Received:
    306
    So you want it to operate as a Key system? Sort of defeats the whole point of using 3CX. I'm not sure, myself , if this is do-able. The keys are meant to be datafilled as a "line" , I'd be surprised to find out that you set it up to monitor a trunk.
     
Thread Status:
Not open for further replies.