Template for Grаndstrеаm GXP2130/2140/2160

Discussion in '3CX Phone System - General' started by eagle2, Mar 5, 2015.

Thread Status:
Not open for further replies.
  1. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    Does anybody has a template or link to template for new Grаndstreаm phones GXP-2130/2140/2160 ?
    Earlier there was one on vendor's webpage, but probably deleted or moved.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  2. cobaltit

    cobaltit Active Member

    Joined:
    Mar 22, 2012
    Messages:
    828
    Likes Received:
    124
    Here you go

    http://bit.ly/1BVrVqJ
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    Thanks :)
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  4. north7

    Joined:
    Nov 9, 2010
    Messages:
    9
    Likes Received:
    1
    Were you ever able to get these to work? We're testing the 2130 and they will not provision in V12 with or without that template and the latest firmware. It shows up in the console, and can be assigned to a new extension but never actually provisions.

    Also, I don't see why GS keeps these files from end users?
     
  5. north7

    Joined:
    Nov 9, 2010
    Messages:
    9
    Likes Received:
    1
    Thanks for that! I installed per the instructions, but we still can't get these to provision at all.

    They are set to use the same option 66 url as our other 1405's, and they boot up and show up in the unassigned phones console, but after we assign them to a new extension or existing, nothing happens. No reboot or anything. We can reboot them, and they show up again as unassigned. the only evidence that they are hitting the PBX is the following notation in the logs:

    New SIP device is on-line: MAC:000B8264F0D1; ip=10.0.0.70; contact=sip:10.0.0.70:5080

    The above phone is assigned to a valid extension, and if I add a 1405 to that extension it provisions immediately.

    All the phones have 1.0.4.21 firmware and our PBX is 12.0 SP6.1
     
  6. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    Is it possible to add template for Grаndstrеаm phones in V14, seems 3CX is not allowing adding custom templates ?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  7. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    Does somebody created templates for Grandstream 21302140/2160 for 3CX version 15 ?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  8. dmayer

    Joined:
    Jul 8, 2016
    Messages:
    10
    Likes Received:
    0
    Grandstream has taken the effort out of this, they make templates for 3CX, but you need to sign up to be a Grandstream reseller, that part is free. After you do so, it'll be on their reseller portal under marketing materials. It also allows you to submit a case and then call them as they won't allow callins for non-resellers.
     
  9. Sopock

    Sopock Member

    Joined:
    Jul 11, 2012
    Messages:
    447
    Likes Received:
    20
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  10. dmayer

    Joined:
    Jul 8, 2016
    Messages:
    10
    Likes Received:
    0
  11. eagle2

    eagle2 Well-Known Member

    Joined:
    Apr 27, 2011
    Messages:
    1,085
    Likes Received:
    11
    I found in Internet, but haven't tested yet, the following Grandstream templates for V.15 (WeTransfer link):
    https://we.tl/EVQJZFoCFB
    -- the link is valid for 1 week, if expired, I could send them to anybody sending me a private message with his email.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
    #11 eagle2, Mar 6, 2017
    Last edited: Mar 6, 2017
    antfex likes this.
  12. craigreilly

    craigreilly Well-Known Member

    Joined:
    Feb 1, 2012
    Messages:
    3,097
    Likes Received:
    203
    thanks for sharing...
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  13. Panayiotis Panayiotou

    Joined:
    Mar 23, 2017
    Messages:
    1
    Likes Received:
    0
    Hello,

    Could you please post again the provisioning template for V15?

    Thank you in advance!
     
  14. ovj666

    Joined:
    Apr 23, 2017
    Messages:
    1
    Likes Received:
    0
    Could you share link for grandstream template again, Thank you
     
  15. antfex

    Joined:
    Jul 29, 2017
    Messages:
    1
    Likes Received:
    0
    Could you share link for grandstream template again ?
     
  16. jpenberthy

    Joined:
    May 31, 2010
    Messages:
    7
    Likes Received:
    0
    Could I also get the link, also does it include the newer GXV series?
     
  17. sip.bg

    sip.bg Active Member

    Joined:
    Nov 7, 2016
    Messages:
    704
    Likes Received:
    219
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
    bort and antfex like this.
  18. bort

    Joined:
    Sep 8, 2017
    Messages:
    3
    Likes Received:
    0
    I desperately need a GXP2130 template for V15. Could someone please post it again.
     
  19. cobaltit

    cobaltit Active Member

    Joined:
    Mar 22, 2012
    Messages:
    828
    Likes Received:
    124
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
    bort likes this.
  20. Bret Gordon

    Joined:
    Jun 16, 2017
    Messages:
    24
    Likes Received:
    3
    Grandstream support is good. They have provided me with 3cx templates over at their forum (see my thread here on the GXP 1620/1625). Just go over there and ask. :)
     
    bort likes this.
Thread Status:
Not open for further replies.