The cloudest 3CX

Discussion in '3CX Phone System - General' started by CoolW, Sep 14, 2016.

Thread Status:
Not open for further replies.
  1. CoolW

    Joined:
    Sep 14, 2016
    Messages:
    3
    Likes Received:
    1
    Hi.

    I was wondering if you guys could help, I've setup a test server in azure and that's working fine but I just needed to clarify a few things, I've had a look around the forums but couldn't find anything definitive:

    Is it possible to run a remote site with <30 users without a SBC?

    Can you have multiple tunnels coming from one IP?

    Are CTI features still only available via SBC for external users or can you use STUN or tunnel?



    Cheers!
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,752
    Likes Received:
    285
    I can answer a couple...

    You will probably end up with a lot of (audio amongst other) issues if you try setting up a remote site of more than a couple of sets, and not using the SBC. You could try passing all audio back through the PBX, but, for a large site, it is a waste of bandwidth.

    A tunnel is to one remote IP, so , one IP at the server end, but you'd need multiple pubilc IP's at (one?) remote location to use more than one tunnel.
     
  3. YiannisH_3CX

    YiannisH_3CX Support Team
    Staff Member 3CX Support

    Joined:
    May 10, 2016
    Messages:
    6,016
    Likes Received:
    421
    CTI is still only available via SBC for remote users i am afraid
     
Thread Status:
Not open for further replies.