transfer resume from queue issue

Discussion in '3CX Phone System - General' started by dhadland, Feb 27, 2012.

Thread Status:
Not open for further replies.
  1. dhadland

    Joined:
    Oct 5, 2011
    Messages:
    3
    Likes Received:
    0
    OK, here’s my issue:

    A customer rings in (queued) to reception, reception answers (2 way voice established) customer wants to talk to manager so is put on hold with transfer button while reception asks manager if its OK for him to take the call. Manager says no so the resume button is pressed to take the call back, from here there is one way voice (customer can hear but reception can’t) This happens only sometimes, but almost every time its embarrassing. Some days it happens a lot. This is a medical practice so the reception phones never really have time for the earpiece to cool down.

    Using a Yealink T26P Phone with firmware 6.61.0.70
    3CX version is 10 with service pack 6.

    Any help on this would be appreciated.

    Darryn
     
  2. dhadland

    Joined:
    Oct 5, 2011
    Messages:
    3
    Likes Received:
    0
    So no suggestions? Any suggestions at all would be appreciated, even if it’s a no brainer suggestion.
     
  3. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,374
    Likes Received:
    231
    Perhaps it's the way the call is "put on hold". Is this a part of an attended transfer, where the call is "rejected" over the phone. Is it the method that would normally be used for a blind transfer? Or, does reception walk over and ask in person? If it's the second case then perhaps they should be using a hold button rather than transfer.
     
  4. dhadland

    Joined:
    Oct 5, 2011
    Messages:
    3
    Likes Received:
    0
    Thanks for your reply leejor, the call is put on hold with the transfer button, so its attended (reception asks on the phone, not in person) then it is resumed back again when manager can't accept the call. Is this the correct way or am i doing this wrong???
     
Thread Status:
Not open for further replies.