Two CID's on one gateway?

Discussion in '3CX Phone System - General' started by MikeMelga, Sep 10, 2015.

Thread Status:
Not open for further replies.
  1. MikeMelga

    Joined:
    Mar 15, 2011
    Messages:
    77
    Likes Received:
    0
    Hi.

    I use a voip provider that allows you to setup multiple caller ID's.
    I have setup 2 callerid's on the voip providers webpage. I can choose to use one or another from the voip provider webpage.
    I can setup 3CX to use one number or another but what I would really love to do is configure both numbers at the same time.

    That way I could for example use an outbound rule that would use number X.

    Is this possible? Can I configure a voip provider in 3CX to have more than 1 CallerID?

    Thanks.

    Regards,
    Mike
     
  2. leejor

    leejor Well-Known Member

    Joined:
    Jan 22, 2008
    Messages:
    10,356
    Likes Received:
    224
    I seem to recall, that the question of sending a different CID (over the same trunk group) simply by dialling a different code (prefix), has come up before and resulted in a dead end. As far as I'm aware outgoing CID is configured in one of two places, the trunk settings, and/or the extension settings within 3CX. Version 14 may be different.
     
  3. MikeMelga

    Joined:
    Mar 15, 2011
    Messages:
    77
    Likes Received:
    0
    leejor,

    Thanks for the reply.
    I'll have to wait that something like that is implemented in 3cx :)
     
Thread Status:
Not open for further replies.