UK Caller ID - Suitable Gateway

Discussion in '3CX Phone System - General' started by abercoms, Jun 11, 2007.

  1. abercoms

    Joined:
    May 3, 2007
    Messages:
    12
    Likes Received:
    0
    Can anyone advise a suitable gateway that will do UK Caller ID from PSTN via Digital Receptionist, reading through some posts, I am confused (not hard at the moment) saying DR doesnt pass through. Just for the sake of testing I tried an (unsuported) SPA400 coz I've got one on the config supplied here, yep it works but just like on the SPA9000 I get no caller ID...

    Thanks in advance
    Dave
     
  2. 3CXsupport

    3CXsupport New Member
    3CX Staff

    Joined:
    Aug 21, 2006
    Messages:
    193
    Likes Received:
    0
    I would advise you ask your telco what CID standard is being used on your line. Most parts of europe are using ETSI FSK, the US is mainly Bellcore FSK. If I am not mistaken BT (U.K) have a propriety FSK standard. If you buy a gateway that does ESTI and Bellcore you still might have problems so it's best if you check first.
     
  3. abercoms

    Joined:
    May 3, 2007
    Messages:
    12
    Likes Received:
    0
    Hi
    Have you ever tried getting anything technical out of BT?
    I had hoped someone would say 'Yes, the such and such gateway works'
    I am aware of your approved list hopefully you will know of one which does from the list?
    Thanks
    Dave
     

Share This Page