Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Unable to Dial Out

Discussion in '3CX Phone System - General' started by Flyer78, Feb 12, 2012.

Thread Status:
Not open for further replies.
  1. Flyer78

    Joined:
    Sep 28, 2007
    Messages:
    4
    Likes Received:
    0
    I am using a T.38 Fax service that is running on my print server. When the call out takes place you can see the IP's are different.I'm trying to figure out if there is a way to whitelist the IP to allow the call or what exactly is going on so that I can change what needs to be changed on the client side

    Address of my 3CX server: 10.0.0.102
    Address of the Fax Server: 10.0.0.3


    19:41:23.818 [CM502001]: Source info: From: "IPFax"<sip:211@10.0.0.3>;tag=IPF_PORT_0001_1003<sip:4038795050@10.0.0.102>
    19:41:23.818 [CM503013]: Call(8): Incoming call rejected, caller is unknown; msg=SipReq: INVITE 4038795050@10.0.0.102 tid=1005 cseq=INVITE contact=211@10.0.0.3:5060 / 2 from(wire)
    19:41:23.715 [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
    INVITE sip:4038795050@10.0.0.102 SIP/2.0
    Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK1004
    Max-Forwards: 70
    Contact: <sip:211@10.0.0.3:5060>
    To: <sip:4038795050@10.0.0.102>
    From: "IPFax"<sip:211@10.0.0.3>;tag=IPF_PORT_0001_1003
    Call-ID: cbfa34cd-4948-47c4-bd2d-dcfee5063056@10.0.0.3
    CSeq: 1 INVITE
    Allow: INVITE, ACK, BYE, CANCEL, REFER, NOTIFY
    User-Agent: Net Satisfaxtion/IP_FAX-0.0.0.0
    Content-Length: 0
     
Thread Status:
Not open for further replies.