Use gateway in other server

Discussion in '3CX Phone System - General' started by MasterX, Sep 22, 2010.

Thread Status:
Not open for further replies.
  1. MasterX

    Joined:
    Oct 2, 2008
    Messages:
    28
    Likes Received:
    0
    Hi,
    I have a server with 3cx system ; this server already in use haven't device audio.
    I installed a second server with device audio, with only gateway for skype.
    Now for make the final configuration , what I do?
    Make tunnel between two server and in primary server set as gateway ip other server?
     
  2. igor.snezhko

    igor.snezhko Active Member

    Joined:
    Jan 7, 2008
    Messages:
    666
    Likes Received:
    5
    Dont waste your time. Use this one at your first server

    [​IMG]
     
  3. TotallyVoIP

    Joined:
    Jul 2, 2010
    Messages:
    77
    Likes Received:
    0
    it is simple to have multiple Skype gateways running on 1 server, from separate PC's even over a VPN

    On the skype gateway when you install it just enter the IP address of the 3CX server (not local host, as it is not the same PC).

    On the 3CX trunks you enter the IP address of the PC hosting the Skype gateway.

    We used fixed IP's on our network, so once a MAC address is added it always gets the same IP internally. If you have a different setup you will not be able to use IP's, I have not tried the machine names, this might work too.

    Just remember to use a new gateway port number for each Skype account (increment by 2 is I understand the norm).

    Any problems, post the issue, but it was pretty straightforward.
    good luck
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
Thread Status:
Not open for further replies.