Using a Cisco PSTNM Gateway....

Discussion in '3CX Phone System - General' started by mjwilson0675, Apr 5, 2010.

Thread Status:
Not open for further replies.
  1. mjwilson0675

    Joined:
    Apr 5, 2010
    Messages:
    2
    Likes Received:
    0
    calls coming in from my cisco gateway are getting these errors....
    I found where need to put the inbound pramaters.. I just cant figure out what to put in there...
    I would like to some place a rule that "all calls" from the gateway ( @10.101.21.1:5060 as seen below) will be accepted, but again I cant find the right combonation for the rule... can anyone point me in the right direction?

    Code:
    14:42:00.281  [CM500002]: Unidentified incoming call. Review INVITE and adjust source identification:
      INVITE sip:+7777777771@10.101.21.41:5060 SIP/2.0
      Via: SIP/2.0/TCP 10.101.21.1:5060;branch=z9hG4bK42169D
      Max-Forwards: 69
      Contact: <sip:mwilson@10.101.21.1:5060;transport=tcp>
      To: <sip:+7777777771@10.101.21.41>
      From: <sip:mwilson@10.101.21.1>;tag=EF51C80-1A7A
      Call-ID: AE3FE2A5-401911DF-8564D848-C4F15CAE@10.101.21.1
      CSeq: 101 INVITE
      Expires: 180
      Min-SE: 1800
      Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
      Date: Mon, 05 Apr 2010 18:41:28 GMT
      Supported: 100rel, timer, resource-priority, replaces, sdp-anat
      Timestamp: 1270492888
      User-Agent: Cisco-SIPGateway/IOS-12.x
      Allow-Events: telephone-event
      Content-Length: 0
      Remote-Party-ID: <sip:mwilson@10.101.21.1>;party=calling;screen=no;privacy=off
      Cisco-Guid: 2923342421-1075384799-2237585480-3304152238
      
    14:42:00.281  [CM302001]: Authorization system can not identify source of: SipReq:  INVITE +7777777771@10.101.21.41:5060 tid=42169D cseq=INVITE contact=mwilson@10.101.21.1:5060 / 101 from(wire) 
     
  2. t4mack

    Joined:
    Jan 19, 2010
    Messages:
    56
    Likes Received:
    0
    You would need to create a DID (number that's being called under) the inbound rules. The you can froward the call to whatever extension you need it to go to. Can you post your current inbound rules.
     
Thread Status:
Not open for further replies.