Voip/PSTN Gateway

Discussion in '3CX Phone System - General' started by jcosat75, Oct 5, 2012.

Thread Status:
Not open for further replies.
  1. jcosat75

    Joined:
    Oct 3, 2012
    Messages:
    2
    Likes Received:
    0
    I am trying to configure a HT701for use with a FAX machine. I have seen other forum posting where it looking like the HT701 has a template in 3CX. However I have not been able to find it. When I used the HT template that is is 3CX it did not give me the option to put in the MAC address and did not give me the location of the config file. I have the DID all setup and T38 is not a problem. I just need help getting the device configured in 3CX and the device itself. I hope someone can help.
     
  2. mixig

    mixig Active Member

    Joined:
    Dec 13, 2011
    Messages:
    524
    Likes Received:
    12
    Hi,

    template for HT:management console-> VoIP/PSTN Gateways-> Add Gateway-> Brand:Grandstream, model HT701...
     
  3. jcosat75

    Joined:
    Oct 3, 2012
    Messages:
    2
    Likes Received:
    0
    The Problem I am having is that when I go to add a Voip\PSTN Gateway the only choice I have For GrandStream other than the GXW series is HT 488 and thats it
     
  4. mixig

    mixig Active Member

    Joined:
    Dec 13, 2011
    Messages:
    524
    Likes Received:
    12
    Which version of 3cx do you have? in 3cx management console go to "3CX Phone System Updates"-> "Voip gateway template updates "and see if there is template for your model... than do "update for that template"
     
Thread Status:
Not open for further replies.