way to use VoIP gateway D-Link DVG-1120S with 3CX

Discussion in '3CX Phone System - General' started by harryok, Apr 15, 2007.

Thread Status:
Not open for further replies.
  1. harryok

    Apr 12, 2007
    Likes Received:
    I have a D-Link's DVG-1120S (converted from DVG-1120M)

    Is there one have experience on registered DVG-1120S to 3CX?

    The connection is :
    1. Connect the PSTN phone line to "LINE" port
    2. Connect the "LAN" port to my switch

    I try to see if I can dial from internal to outside with PSTN line.

    Any one been doing this?

    Any other way to use this DVG-1120S with 3CX?
  2. Anonymous

    Anonymous Guest

    Mate, posts like this are good and willing to take it on however, if you can provide links to manuals or vendor sites.

    This helps to get an understanding of the hw you use.

Thread Status:
Not open for further replies.