Welltech ATA172plus

Discussion in '3CX Phone System - General' started by neville, Jul 15, 2016.

Thread Status:
Not open for further replies.
  1. neville

    neville New Member

    Joined:
    Apr 23, 2012
    Messages:
    212
    Likes Received:
    36
    How do I add the Welltech ATA172plus? I have ran updates for it, but it is not found when trying to select it under gateways for Welltech.
     
  2. Aram

    Aram Support Team
    Staff Member 3CX Support

    Joined:
    May 7, 2012
    Messages:
    124
    Likes Received:
    23
    Hi neville,

    The ATA (FXS) devices are not added yet. We will add them soon.
    For now you can add and register them manually:
    1. Open the Management Console and navigate to the FXS/DECT page;
    2. Add 2 extensions there and save the usernames and passwords in the text file;
    3. Download attached file and rename it from MAC.txt->to MAC address of your ATA172 device .dat (all letters capital). Example: 0001A80A2F73.dat ;
    4. Edit the file and make the following modifications:
    PBXIP - change to the IP address of your 3CX Phone System
    PBXSIPPORT - change to the SIP port of your 3CX Phone System (default is 5060)
    EXTNUMBER1 - change to the number of the first extension
    EXTPASS1 - change to the password of the first extension
    EXTNUMBER2 - change to the number of the second extension
    EXTPASS2 - change to the password of the second extension
    5. Save changes and paste the file into the "C:\ProgramData\3CX\Instance1\Data\Http\Interface\provisioning\SECURE_FOLDER" folder.
    6. Do the Step 2 of the following guide:
    http://www.3cx.com/voip-gateways/wellte ... ta172plus/

    Sorry for inconveniences - ATA (FXS) will added soon.
     

    Attached Files:

    • MAC.txt
      File size:
      6.8 KB
      Views:
      72
Thread Status:
Not open for further replies.