Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Yealink T22 T28 support

Discussion in '3CX Phone System - General' started by brentrichburg, Mar 2, 2018.

Thread Status:
Not open for further replies.
  1. brentrichburg

    Joined:
    Nov 16, 2010
    Messages:
    30
    Likes Received:
    0
    I have about 250 combined count of Yealink T22 and T28 phones in my system. Is there a way that I can provision the phones? I understand firmware may be ended, but now I can't reuse a phone on a different extension and have it provision.
     
  2. eddv123

    eddv123 Well-Known Member

    Joined:
    Aug 15, 2017
    Messages:
    1,441
    Likes Received:
    189
    There are still templates for these in 3CX so you can use PnP provisioning as long as they appear in the phones list.

    If they don't you need to investigate why they don't: https://www.3cx.com/docs/plug-and-play-ip-phone/

    The other thing you can do is setup your extensions and take the provisioning link off the extensions and manually enter them into the phones interface.
     
    YiannisH_3CX likes this.
  3. Saqqara

    Saqqara Well-Known Member

    Joined:
    Mar 12, 2014
    Messages:
    1,255
    Likes Received:
    203
    Delete the current config with the console, i.e delete the old extension, or delete the phone config under the extension if you more than one phone under the extension

    do a factory rest on them (pressing the OK button for awhile), then you can provision them according to the info in this url https://www.3cx.com/sip-phones/yealink-t20p-t22p-t26p-t28p/
     
    #3 Saqqara, Mar 3, 2018
    Last edited: Mar 3, 2018
Thread Status:
Not open for further replies.