Dismiss Notice
We would like to remind you that we’re updating our login process for all 3CX forums whereby you will be able to login with the same credentials you use for the Partner or Customer Portal. Click here to read more.

Yealink T22P BLF

Discussion in '3CX Phone System - General' started by asmith3006, Mar 31, 2014.

Thread Status:
Not open for further replies.
  1. asmith3006

    Joined:
    Mar 5, 2014
    Messages:
    94
    Likes Received:
    5
    I'm currently testing 3CX with the Yealink T22P phones.
    http://www.3cx.com/sip-phones/yealink-t20p-t22p-t26p-t28p/ -(new link) this page says that the T22P doesn't have BLF, but the menu on the phone certainly has them and the documentation on the yealink site says it has them too http://www.yealink.com/Upload/manual/m/Yealink_SIP-T22P & SIP-T22_User_Guide_V72_25.pdf#page=109

    I've tried setting the value for BLF 1,2,3 in the extension properties but it's not coming down to the phone.

    On the phone if I try and manually set them with an extension 6120 (which is a logged in extension) then I get "extension error" when I press the button and no notification.

    Can anyone say if they've got this working on the Yealink please?

    Thanks
     
  2. craigreilly

    craigreilly Well-Known Member

    Joined:
    Feb 1, 2012
    Messages:
    3,569
    Likes Received:
    302
    can you give us a screenshot of the BLF Setup in the web config?
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. asmith3006

    Joined:
    Mar 5, 2014
    Messages:
    94
    Likes Received:
    5
    Craig,

    I'm not configuring the settings in the web interface, I'm using the 3CX page. Do I need to configure this in the phone pages too?
     

    Attached Files:

  4. asmith3006

    Joined:
    Mar 5, 2014
    Messages:
    94
    Likes Received:
    5
    Hi,

    I have got this working by editing the web interface of the phone directly, however when I re-provision the phone the settings disappear.

    Is it possible to configure this setting through 3CX so after firmware upgrades / reprovisioning we'll still have these settings saved?

    Thanks.
     
Thread Status:
Not open for further replies.