Yealink T46S Ringtone won't change

Discussion in '3CX Phone System - General' started by Sean Williams, Nov 7, 2017.

Thread Status:
Not open for further replies.
  1. Sean Williams

    Joined:
    Nov 6, 2017
    Messages:
    11
    Likes Received:
    2
    Hi all,

    This should be a simple one to solve but I cannot get it to work for some reason...

    I want to change the default ringtone on my Yealink T46S from the Ring 1 tone.

    I've tried changing it in the physical handset itself by going to Menu-Basic-Sound-Ring Tones- and selecting Ring 8 and saving config, with no luck.

    I've logged into 3CX admin console and changed the 'configure default ringtone' under extension settings to Ring 8, but it still rings as Ring 1.

    In both cases, I'm just calling into my DID from my mobile.

    I have updated the firmware on T46s to 66.82.0.20 just in case.

    Running 3CX Pro 15.5.5

    What am I missing? Thanks all.
     
  2. YiannisH_3CX

    YiannisH_3CX Support Team
    Staff Member 3CX Support

    Joined:
    May 10, 2016
    Messages:
    6,428
    Likes Received:
    458
    Hello @Sean Williams

    Please note that the option for changing the ringtone under extension settings changes the default ringtone of the phone. If the call comes from an external source then the distinctive ringtone for external calls will be played that does not change through the management console options. To test and make sure that ringtones are changing make a local call (extension to extension) and see if the change is applied correctly
     
Thread Status:
Not open for further replies.