Yealink Wireless Adapter with T28?

Discussion in '3CX Phone System - General' started by tj18, Feb 27, 2012.

Thread Status:
Not open for further replies.
  1. tj18

    Joined:
    Dec 6, 2011
    Messages:
    10
    Likes Received:
    0
    Hi,

    Was wondering if anyone is using a Yealink T28 Phone with the Yealink Wireless Headset Adapter (EHS36). In theory, this is for our receptionist to place and receive calls wirelessly away from the desk. We have the wireless Plantronics CS540.

    Connection Config, testing from my T26:
    /Power/---[YealinkT26 Phone Ext Port]---RJ12---{EHS36}--3.5mmDC---[Plantronics Base]---/Power/

    Willing to try options. I also have the RJ45 cord provided, however this cord seems to be needed for the Netcom/Jaba wireless headsets.

    Thanks for the help!
     
  2. Ian Joyce

    Joined:
    Oct 9, 2009
    Messages:
    51
    Likes Received:
    0
    Yes the EHS36 is supported on both the T28 and the T26 from Yealink. The Plantronics CS series headsets have been tested to work with the EHS36 also.
     
    Stop hovering to collapse... Click to collapse... Hover to expand... Click to expand...
  3. countrycomp

    Joined:
    Dec 2, 2008
    Messages:
    53
    Likes Received:
    2
    Which firmware version do the Yealinks have?
     
  4. tj18

    Joined:
    Dec 6, 2011
    Messages:
    10
    Likes Received:
    0
    Forgot to point out specifically that we have the needed hardware, its just not working :D .

    The T26 firmware is 60.50.0.50 and the T28 firmware (where this will be permanent) is 2.50.0.50
     
  5. tj18

    Joined:
    Dec 6, 2011
    Messages:
    10
    Likes Received:
    0
    Update: There is an audible "click" sound coming from the Yealink wireless adapter - so something is detecting here.
     
  6. countrycomp

    Joined:
    Dec 2, 2008
    Messages:
    53
    Likes Received:
    2
    That T28 firmware is too old. Update to 2.60.x.x or preferably 2.61.0.80 . I had to update some T28's to get the EHS to work.

    Dave P.
     
Thread Status:
Not open for further replies.