ZyXEL P-2000W Won't Register

Discussion in '3CX Phone System - General' started by rockinthesixstring, Jun 13, 2008.

Thread Status:
Not open for further replies.
  1. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    I can't for the life of me figure out how to get my WiFi phone to register.
    I have created an Extension (100) with "100" for EVERYTHING (UID, PWD, etc).
    I configure it in the phone, and no matter what I do I get "Not Registered" in both the phone and the 3CX GUI.

    Does anyone have any suggestions or experience?

    Regards
    Chase
     
  2. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    no i cannot get the voip client to register either.
     
  3. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    I am using Windows Server 2003 (SBS)
    My Firewall is off
    the voip client on the server seems to work.

    I am using a D-Link DIR-655 Router with the following settings...
     
  4. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    Yes it is a small office network so we are using a basic lan (192.168.0.*)
    I can't figure out why my local (server) voip client works but remote does not.
     
  5. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    sorry, my bad. yes LAN but not the server.
    it cannot be a firewall on the computer because i shut the firewall off to test.
    also, the ultimate goal is to get the ZyXEL phone working and it is on the LAN but not connected to any firewall.
     
  6. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    I am getting close. I can now connect using the 3CX Voip Client... now when I try to make an outgoing call I get...
    Code:
    21:01:33.312 Call::Terminate [CM503008]: Call(4): Call is terminated 
    21:01:33.296 Call::RouteFailed [CM503014]: Call(4): Attempt to reach [sip:12505554444@192.168.0.101:5060] failed. Reason: Not Found 
    21:01:33.296 CallCtrl::onSelectRouteReq [CM503013]: Call(4): No known route to target: [sip:12505554444@192.168.0.101:5060] 
    21:01:33.281 CallCtrl::onIncomingCall [CM503001]: Call(4): Incoming call from Ext.100 to [sip:12505554444@192.168.0.101:5060] 
    
     
  7. rockinthesixstring

    Joined:
    Jun 4, 2008
    Messages:
    14
    Likes Received:
    0
    Yeah

    [Name:Rule For CallCentric] [Route 1:CallCentric] [Number Prefix:0]
     
Thread Status:
Not open for further replies.