TryLearn More

Use SIP trunks, WebRTC & Apps

Slash your Phone Bill by 80%

VoipVoice - SIP Trunk

On this topic

VoipVoice - SIP Trunk

About VoipVoice

System Preparation

3CX Version

Provider Capabilities

Configuring the Trunk with 3CX

Adding the Trunk

Adding Additional DIDs

Creating Inbound Rules

Number Format

General

Outbound Caller ID

Outbound Rules

About VoipVoice

VoipVoice was founded in 2004 out of a merger of a number of Italian firms with long experience in delivering IT, software and VoIP telecommunication services and is one of the pioneer VoIP Providers in Italy. Today, VoipVoice is a growing, dynamic company, which operates on sound business principles, and is able to provide a complete service for every business need, including geographic numbers associated with VoIP accounts, number portability, free VoIP to VoIP calls, pre-sales technical consulting, installations of IP PBXes and training.

Reference website: VoipVoice

System Preparation

Before configuring the SIP trunk it is required to go through the following checklist and make changes where necessary:

Further setup information can be found in our Academy: 3CX Academy Basic Course

3CX Version

Some providers gained support and compatibility with 3CX on a specific product version. It is advisable to always run the latest version of 3CX to ensure ongoing compatibility.

Minimum 3CX Version: 3CX Phone System 15.5 SP2

Provider Capabilities

Below is a short overview of the provider's capabilities and services and whether they’re supported or not:

  • CLNS (Clip No Screening): No
  • Catch All Routing: Yes
  • Fax T.38 support: Yes
  • CLIR (Number Suppression):         No
  • DTMF via RFC 2833:        Yes
  • Codec Order: G711A, G711U, G729
  • NAT Support: Yes

Configuring the Trunk with 3CX

The general instructions outlining how to add a new SIP Trunk to your 3CX installation can be found here.

Adding the Trunk

Go to “SIP Trunks” and select “Add SIP Trunk”

  • Select Country: IT
  • Select Provider in your Country: VoipVoice (User)
  • Main trunk number: This will have been provided to you by VoipVoice. You must enter the number in the National number format (e.g. 0597353000)
  • Press OK

Under the “General” tab in the “Authentication” section enter your Authentication ID and Password (these will be supplied to you by VoipVoice).

Once you have filled in these fields as given to you by VoipVoice, scroll to the top of the page and press OK. At this point if you refresh the page you should see your VoipVoice Trunk appear as Registered.

Adding Additional DIDs

To associate all other DIDs/Numbers you have in your VoipVoice account with 3CX, go to the Management Console → SIP Trunks, double-click on your VoipVoice Trunk and go to the “DIDs” tab.

Here you should already see 1 entry; this is the Main Trunk number you have set. Add all other DIDs/Numbers you have to the list in an National number format (e.g. 0597353000) and press OK.

Creating Inbound Rules

Now that you have associated all your DIDs/Numbers with your SIP Trunk in 3CX, you can create Inbound Rules to set where calls will be routed when those numbers are called. Instructions on how to create Inbound Rules can be found here.

Number Format

General

When configuring VoipVoice SIP Trunks in 3CX, all numbers should be entered in an National number format (e.g. 0597353000), otherwise call routing will fail.

Outbound Caller ID

VoipVoice Trunks does not support Clip No Screening which means that you cannot present a number as a Caller ID that is not associated with your account.

Outbound Rules

When configuring your Outbound Rules make sure that all numbers are dialed either in the National (e.g. 0597353000) or International (e.g. 00320597353000). More information about how to create Outbound Rules and how they work can be found here.