Recent content by Baggins

  1. PSTN Problems - Cannot make call

    ok sorry for the delay, I havent had a chance to get back to you guys. I have tried all the suggestions (thanks). The DNS did not help. So I fully uninstalled 3cx ver 10 and did a fresh ver 11 install. I configured everything from scratch. provisioned 1 phone (ext 10 - Yealink) Configured...

  2. PSTN Problems - Cannot make call

    Thanks for your reply. The ip address of the machine running 3cx is in the range of 127.x.x.x whereas the router is 192.168.x.x - if you take a look at the logs all the extensions for voicemail 99 etc are using the 127.x.x.x range but extension 10, which is my ip phone is 192.168.x.x range...

  3. PSTN Problems - Cannot make call

    Ok sorry for the late reply, I have made those changes Leejor, however now getting an server error? Please see logs and new screen grabs. Ive added the router grabs also. This is getting frustrating, would I be advised to upgrade to version 11? Your help is much appreciated Thanks.

  4. PSTN Problems - Cannot make call

    Thanks Leejor, I'll try your suggestions and get back with an update. If the DP should not be 8 - Should I use say 1? and if so what should I put in 1?

  5. PSTN Problems - Cannot make call

    Setup - V10 3CX Phone Yealink T22P ip phone SPA3102 Gateway ip of 3CX 192.168.0.10 ip of SPA 192.168.0.8 Config - Spa registered ok - Yealink Provisioned ok NO VOIP SETUP - Only PSTN line for both incoming & outgoing calls ----------------- I have not been able to make an outgoing call on...

  6. Linksys SPA 3102 | Impossible make call outside

    I know this post is very old but I have the same problem. I have read many posts saying the spa 3102 is fantastic (part of the reason I purchased mine) - Did anybody ever work this out? I can receive inbound calls I cannot make outbound calls -see logs I do not have a VOIP setup, only trying...
See more
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom