Search results

  1. Raspberry Pi 3 as SBC for 30+ Phones

    Hi All, We need to configure and deploy an SBC for a new installation that will have 32 extensions, 16 SIMs, and around 200 BLFs. We're finding that the 4GB/8GB Raspberry Pis are completely unavailable. We do have a Raspberry Pi 3 B+ unit with 1 GB of RAM, though. Should we not even attempt...

  2. SBC keeps registering and then failing

    Never checked the port config on the firewall, although it is currently set to 1000 Mbps - Full Duplex. I guess it's one of those things where we'll never know for sure. I hate those things.

  3. SBC keeps registering and then failing

    Just patch cables. We never disconnected power from the ISP's router.

  4. SBC keeps registering and then failing

    I'm very happy to report that the issue is resolved. We configured a low-end router with the internal 192.168.2.x network, disconnected the firewall (which disconnected the rest of their internal network) from the ISP's CPE and connected the router. We initially saw the Internet bouncing up...

  5. SBC keeps registering and then failing

    I really doubt it's the firewall (I know, "it's always the firewall"), but this setup has been working fine for months and no config has been changed. We are on 18.1.36 of the SBC. I doubt it's the switch, because connections between other devices would be experiencing issues, and we've tried...

  6. SBC keeps registering and then failing

    As an update, we configured a new SBC in our office and it maintained registration for over 10 minutes before we shut it down and shipped it to the client. After plugging in the new SBC, it is exhibiting the same symptoms as the others, and it definitely has the correct IP, gateway, and DNS...

  7. SBC keeps registering and then failing

    So this is interesting...pinging an external IP (8.8.8.8) from the SBC yields about 50% packet loss, even though pings to the SBC are 100% good. However, packet capture on the inside and outside interfaces of the firewall shows the pings going out and coming in--even when the SBC is not...

  8. SBC keeps registering and then failing

    I considered the port, but we're getting consistent sub-millisecond replies every second on the pings.
View older results
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom