Search results

  1. smario

    Big Problem after update from 15.5.1136.6 to 15.5.3849.1

    Hello, How did you install Debian? - From our ISO, installed on the cloud?
  2. smario

    Error on Linux Install

    Hi, Issue the following command in a terminal and paste the output of that command here for me to see. cat /etc/apt/sources.list.d/3cxpbx.list Typo in the file. This can happen for example when copying rich text and ended up pasting it as plain text.
  3. smario

    SBCs and Disk I/O requirements

    Correction on my part, yes, 20 phones with up to 10 BLFs. Typo from me in previous post =)
  4. smario

    Solved Unable to locate package 3cxpbx

    The OrangePi is an ARM based device. This will not work with 3CX PBX - but does work with the SBC. You need a 64-bit architecture machine. There is no workaround to make 3CX work on a non-supported architecture. As I mentioned, Mini PCs are cheap. Gigabyte, Shuttle, Zotac and other...
  5. smario

    SBCs and Disk I/O requirements

    For the Pi, for office locations up to 20 phones with 10 BLFs is what we recommend. For more extensions, you would have to use Debian or Windows SBC. Disk IO is negligible on the SBC and as such you can consider a card for storage if you will be using a Mini PC. The Pi works this way so there's...
  6. smario

    Solved Unable to locate package 3cxpbx

    I appreciate your restrictions but ideally it would be great for you to be able to register your SIP trunk in the cloud if your provider can allow that PBX's IP. Alternatively, if you really can't be in the cloud, you should look into 3CX on a mini PC. Mini PCs are true multicore 64bit systems...
  7. smario

    Error Create Database 3cx Debian

    Installing Debian on Hyper-V for use with 3CX requires a little bit of preparation of the VM on the host's side. Allow me to direct you to our documentation on Hyper-V available at the following URL: https://www.3cx.com/docs/installing-microsoft-hyper-v/#h.cjj20zk71lns The instructions in the...
  8. smario

    Error Create Database 3cx Debian

    Where did you install it on? A virtual machine in the cloud, on your desktop, on physical hardware?
  9. smario

    Error Create Database 3cx Debian

    Hello, Tell me a little more about your setup. Is this a VM on hardware, in the cloud? Was is installed via our ISO? What exact version of Debian are you using? You can type "lsb_release -a" to check.
  10. smario

    3cx Debian not publishing the web configuration app via IPv4 only via ipv6

    For us to be able to determine what the problem is here, it's important that you provide information that will help us. This will also save you a lot of potentially unnecessary time tailing log files that might not even drive you in the direction to a solution.
  11. smario

    3cx Debian not publishing the web configuration app via IPv4 only via ipv6

    Can you please confirm for me that the exact ISO you are using is: http://downloads.3cx.com/downloads/3cxpbxiso/debian-8.6.0-amd64-netinst-3cx.iso. You also mentioned pictures attached but I can't see any attached to the post. Could you please post so that you can help us determine what might...
  12. smario

    3cx Debian not publishing the web configuration app via IPv4 only via ipv6

    Hello, As per Nicky's recommendation, spinning up a new ISO would be a good idea. The results you have received from the installation are not at all in line with the expected result of your setup. As such I am advising that you follow our Debian for 3CX Installation procedure here during your...
  13. smario

    New Debian 3cx install GRUB Fails

    It looks like you're faced with one or possibly two problems here. M2 support for the current Debian stable kernel is sometimes problematic but thankfully not far from the current kernel version, things improve drastically. Secondly, there is a known bug in grub installing the bootloader on nvme...
  14. smario

    G.711 FAX Functionality with 3CX

    Continue reading the Original Blog Post.
  15. smario

    New Debian 3cx install GRUB Fails

    Hi, Are you installing our ISO? Make sure that from the BIOS settings, check if you have BIOS CSM mode enabled. It is recommended on the NC02U to have this enabled as this forces the Debian installer to boot into PC compatibility mode (and not EFI) and also install GRUB on the MBR rather than...
  16. smario

    Linux 3CX behind Sophos UTM-9 Firewall in a VLAN

    Are you able to identify what type of traffic is being generated?
  17. smario

    Linux 3CX behind Sophos UTM-9 Firewall in a VLAN

    Hello, It's important to be able to correctly identify what type of traffic this is, and which process/service is generating this traffic. This is key to diagnose what your problem could be. You should be able to see the traffic with a traffic sniffer such as wireshark or tcpdump on the PBX...
  18. smario

    Computer to run 3CX linux

    Some Mini PC NIC chipsets are known to be buggy with Linux and that's why we thoroughly test Mini PCs to determine which are the most stable and highest performing units to run 3CX on. I can't tell you if this is the case with the NUC you mention because we don't know the chipset the NIC is...
  19. smario

    V15 – Update 5 3CX Linux final, more Admin time savings

    During the update process several services are restarted and as such the Management Console is not accessible with the error message you are receiving. You will know that the update has completed because the configured admin email will receive an email with the update status. If you are...
  20. smario

    V15 – Update 5 3CX Linux final, more Admin time savings

    Hi Jem1, Have you received an email that the upgrade has completed?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom