Search results

  1. Choppy Audio on new 3CX deployment

    Good point hadn't though about the VM side, we use VMware and don't worry about that sort of thing ;)

  2. Choppy Audio on new 3CX deployment

    You are sure you don't have a split brained situation with your two connections? You checked utilization on your connection? There is a way to set up DSCP QOS for prioritizing outgoing traffic, there should be plenty of info via Google, I used to use an ASA 5510 without issue with 3cx. Next...

  3. 15.5 SP6 Presence over bridge issue

    I can't find the 75 dollar option, when you log in, the single incident is 295. Regardless, I can happily report the issue is resolved thanks to you @cobaltit, I put in the URLs on each side instead of the IP, and that fixed it. It shouldn't make a difference, especially since it says "IP"...

  4. 15.5 SP6 Presence over bridge issue

    If any resellers see this and are willing to tackle this for a set rate less than 300 let me know :)

  5. 15.5 SP6 Presence over bridge issue

    Yep doubled checked all the settings, using URL's on my end, password is correct, permissions are set correct, not sure what is going on. May have to pay for a reseller to fix, except there are many around here, don't want to spend 295 for a one time 3cx ticket. Ugh

  6. 15.5 SP6 Presence over bridge issue

    It was working prior to SP6.

  7. 15.5 SP6 Presence over bridge issue

    Yep, Pro on both ends.

  8. 15.5 SP6 Presence over bridge issue

    On the master side we can see the presence of the group shared from the slave side, but cannot see the master presence group(s) for the slave side. Calls work fine in either direction, can't seem to figure this one out. Anyone have any ideas?

  9. Configure Outbound Caller ID and e911 per branch office

    We use Wiretap Telecom for 3 locations on the same trunk, you simply give them a list of DIDs or numbers that you want to associate with each location for e911.

  10. Not detecting Fanvil X5S phones

    Fanvils very often come with weird default settings. As a rule of thumb, every time I get new Fanvils, I do a factory reset, and they always show up without issue after that.

  11. Purge scheduled reports

    Excellent :)

  12. Purge scheduled reports

    I do have ssh access, and thought about that, but was wondering if that will corrupt database values that is uses to keep track of these reports.

  13. Purge scheduled reports

    I have 127 pages of saved reports that are scheduled daily and/or weekly. Is there a way of purging these besides one by one?

  14. System phones not changing time after DST

    Mountain time -7 here, 100+ Fanvil X5 phones on latest firmware that are behind an hour.

  15. System phones not changing time after DST

    Ditto with Fanvil X5 phones.

  16. Fanvil X5 Phone Issue

    Yes sp2 but the difference is most people do not use the web interface/ucsta. Glad the issue was found though!

  17. Fanvil X5 Phone Issue

    We have 120+ Fanvil X5 handsets across 3 locations with no lock up issues on latest 15.5 version.

  18. SIP Trunk redundant outbound proxy

    That's what VI suggested, they said they are working on becoming certified again at this time. Thanks-

  19. SIP Trunk redundant outbound proxy

    I can't create another outbound path since I can't select a template for Voipinnovations, it doesn't show up under any country or worldwide.....

  20. SIP Trunk redundant outbound proxy

    I see, will give that a shot
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom