- Joined
- Oct 9, 2018
- Messages
- 31
- Reaction score
- 6
My first installation went well. I got everything configured and then loaded 24 DID numbers in the system. My next task was to create DID Incoming rules for each DID. That went well. I then connected the Spectrum interface to our network and let it get settled in.
We can make calls out but can't call in. This is due to the lack of interface connections from Spectrum SIP to their SBC and then to our network and out thru the Mikrotik CCR. The problem occurs on the return path. There is no path setup in the SBC to the Mikrotik on the incoming route.
Their folks at Spectrum are working to resolve this issue. I just thought I would post this and see what happens. I would be very curious to know if anyone else has had this problem.
Thanks for any comments and pointers in advance.
Dennis
We can make calls out but can't call in. This is due to the lack of interface connections from Spectrum SIP to their SBC and then to our network and out thru the Mikrotik CCR. The problem occurs on the return path. There is no path setup in the SBC to the Mikrotik on the incoming route.
Their folks at Spectrum are working to resolve this issue. I just thought I would post this and see what happens. I would be very curious to know if anyone else has had this problem.
Thanks for any comments and pointers in advance.
Dennis
