Recent content by edwindrood

  1. edwindrood

    MAC Already In Use

    Nothing free here. Customer pays for license (8 Simultaneous Connections) and pays for 3CX Hosting (not on-premise). If it were on-premise, I think I would be able to do more digging.
  2. edwindrood

    MAC address in use.

    I am really curious as to what happened to cause this situation. There were originally 8 people in that office and three people quit at the same time. It was then that I made the owner of the business the 3CX "System Owner" because some changes needed to be made. Nobody has deleted the...
  3. edwindrood

    MAC address in use.

    No, I cannot add extension 106 or 109 back It does not let me re-use those numbers. Yes, I have searched (there are only 6 users) for either of those two mac address and it cannot be found. It is looking like I am completely blocked from using extension 106 and 109 and I am completely...
  4. edwindrood

    MAC Already In Use

    Thanks so much for all your help. I believe you are correct -- this is not the same problem. There were only 8 users and only 8 Yealink T54W phones. Somebody accidentally deleted two users. The remaining 6 users work just fine. However, when I look at active phones I see all 8 yealink...
  5. edwindrood

    MAC address in use.

    I am stumped. I suspect the end-user (who I made an admin) accidentally deleted the "user account" without first removing the phone from the account. Now when I want to provision the phone it says the MAC address is in use. I now have a phone which cannot be used. (this happened twice, so...
  6. edwindrood

    MAC Already In Use

    I have the same problem. I suspect the end-user (who I made an admin) accidentally deleted the user without first removing the phone from the account. Now when I want to provision the phone it says the MAC address is in use. I now have two phones which cannot be used. Factory defaulting the...
  7. edwindrood

    Polycom Group paging compatibility

    We have a BUNCH of Polycom legacy VVX phones (410, 310 411) and SoundStation phones. Polycom has a built-in feature for multicast paging using special sub-groups. For us this works great. Unfortunately, this feature is not supported in the template so we must set up the group paging on each...
  8. edwindrood

    VVX300 vs 301 & VVX400 vs 401

    Curious. I had seen the link that you sent before. It mentions 3CX version 15 and mentions Polycom firmware version 5.6.0. I have done a lot of testing with 3CX version 16 and polycom firmware 5.9.6.2327. Testing from remote sites using an SBC seems to be working just fine as well...
  9. edwindrood

    VVX300 vs 301 & VVX400 vs 401

    I have a client who already owned several of the Polycom VVX 410 phones (some 310). We have deployed these in remote offices (remote from the PBX) and all we needed to do was get one Raspberry Pi 4 in each remote office (configured as SBC) These phones work great and are supported (even...
  10. edwindrood

    Polycom Phones ALWAYS can call pickup on BLF

    I was successful at creating a custom template. I was successful in altering the BLF call pickup behavior. I tried using the string above in the global "behaviors" setting and that did not work. What did work was adding a "restrictPickup="1" on each numbered BLF in the template. Before...
  11. edwindrood

    Polycom Phones ALWAYS can call pickup on BLF

    Problem Defined: Any user can add any extension to their own BLF on their desk phone and will be able to answer calls for that extension. I have not seen this exact problem addressed ... so I am going to assume that this is a problem specific to a particular IP phone. I am about to go "live"...
  12. edwindrood

    Massive IP Blacklist

    What I have is working great! Thanks for all the input. I would not recommend this for everybody but I want to just drop in one last note to finish this off. Why I decided to create this IP block list in the 3CX console (instead of create a massive ACL on the fire-wall). I have a powerful...
  13. edwindrood

    Massive IP Blacklist

    I can't be the first person to do this... Couple of questions... We are going live soon with our on-premise server. ( I am using a left-over server and it is more powerful than need-be for running 3CX.) I have noticed for a while that random blacklisted IP addresses were appearing (because...
  14. edwindrood

    Atomic PI -- Server Hardware

    I have tested an "Atomic PI" set up as an SBC (standard -- not beta) on Version 16. It works great and it is Cheap! This will probably be our solution. Only read this post if you are also going to test the Atomic PI with 3CX. Once again, I just want to repeat that this has nothing to do...
  15. edwindrood

    Atomic PI -- Server Hardware

    Thank you, BrenttG for your reply. This is exactly what I was hoping for. A small, fast, reliable computer. Our business is suffering financially, and the $319 price tag is a bit steep. I have until the first of the year to make any final decisions... so I will keep that Protectli Vault...
See more
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom