Recent content by Kirsty - Fountain IT

  1. Kirsty - Fountain IT

    Solved Yealink Phones won't AutoProvision from 3CX RPS link

    Oi Nial!, hijacking my thread, lol. :p I do not know this man JohnS_3CX :confused::)
  2. Kirsty - Fountain IT

    Solved Yealink Phones won't AutoProvision from 3CX RPS link

    Hi JohnS_3CX, 1) Phones can access the Internet. 2) No the PBX HTTPS port was NOT open. Silly mistake on my part. All working now. 3) The Let's Encrypt hotfix was done. 4) Manually pasting the URL into the phone's interface did not work, because I hadn't opened the console port to the Internet...
  3. Kirsty - Fountain IT

    Solved Yealink Phones won't AutoProvision from 3CX RPS link

    Hi cobaltit, no I cannot access the 3CX console from outside the 3CX server's LAN!! You hit the nail right on the head. Although I had opened all the ports for SIP and media etc (and the firewall tests pass). I had not done the port for the console. I was thinking don't need that open to the...
  4. Kirsty - Fountain IT

    Solved Yealink Phones won't AutoProvision from 3CX RPS link

    Yes, I wrote that in my original post:-
  5. Kirsty - Fountain IT

    Solved Yealink Phones won't AutoProvision from 3CX RPS link

    I have 2 Yealink phones I want to use remotely. A T46S and a T41S. Both phones have been factory reset and are on the latest 3CX recommended firmware. 3CX is version 18 and fully up to date with all updates and patches. All firewall tests have passed. I have followed the Remote Provisioning...
  6. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    Hi Leejor, I had assumed that the Patton device would start at FXO port 0 and work up. It is set to use the ports in sequence and not at random. NickD's suggestion of not detecting dial tone and just dialing after a short delay seems to have worked, so I don't think the call was landing on line...
  7. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    Two further questions related to these devices and analogue lines. The 3 lines the client has are just three separate individual lines, not even in number sequence. One is designated their main incoming published number for incoming calls. A second one is just for dialing out as such, it isn't...
  8. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    Hi Nick, I had already tested all the lines with an analogue phone and they all worked OK. I factory reset the device and did it all again. This time I made the DHCP router give out the final static IP I wanted the Patton device to use. Set the configuration to Dial after 3 Seconds (not wait...
  9. Kirsty - Fountain IT

    Unable to make calls with Patton SmartNode 4141 FXO PSTN Gateway

    I have installed a Patton SmartNode 4141 4 Port FXO PSTN Gateway and connected up 3 working PSTN lines to the first 3 ports. Patton firmware has been updated to the latest and I have meticulously followed all the instructions on the 3CX webpage to configure and provision this device. After the...
See more
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom