Hi all,
I’m hoping someone can confirm whether what I’m seeing is expected behaviour or if I’ve missed a setting.
We’re using 3CX Hosted (Cloud, Free edition) and I’ve successfully added a Twilio SIP trunk that’s Voice + SMS enabled.
Everything is working great — inbound and outbound SMS...
My god I can't believe it - that was all it was. xD
I tried +44 and 01 and no luck and it was a + that was stopping the whole thing from working.....
Thank you so much Nicholas!
Yeah i've tried +44 and 01*** etc.. but neither work. They haven't been particularly helpful in confirming anything with me either.
As long as it's not a limitation of 3CX free or anything, i'll keep trying!
This is my SIP Config:
Then under DID numbers I've listed all the other...
Hi all,
I'm experiencing an issue with DDI call routing in 3CX Cloud Free with a Gradwell SIP Trunk.
Calls to the main trunk number (+44XXXXXXXXX) work fine and ring the correct assigned extension (21011).
Calls to any of the assigned DDI numbers do not route to the correct extensions –...
Thanks Nicolas, come to mention it, I pulled it out the box and attempted to provision it so this may be the issue thank you. I will try that and see how I get on.
Hi all,
I have two SBC's (both router phones) and am using 3CX cloud.
Every time I try to provision my 2nd router phone, it seems to take the config, when it goes to register - it fails and then my IP gets blacklisted.
The error it's throwing back is:
SIP request (REGISTER) from...
Thank you for getting back to me, but I've still got the same issue:
So I've attached the DID to the extension and on the DID's tab in the SIP trunk it is assigned to the user. But when I call it, it still goes to 21011 :(
This is what it shows in the SIP trunk config window, if I change...
Hi all,
I have some issues with configuring my inbound call routes and I'm sure it's a simple thing i've overlooked.
I have set up the SIP Trunk on the system, and it's working but all of my DID's no matter if they are assigned to a user, route to one extension.
You can see below, there are 2...
So after leaving all the phones unplugged for the weekend, it's all provisioned and working now! Must have been a blacklisted IP. I've turned of SIP ALG too - thanks for your help guys.
My IP is definitely blacklisted now, I can't get into the admin portal. So will leave until Monday. I'm using a TPLink ER7206 as my router, anyone aware of any odd settings that may be enabled by default on these that could cause issues? I've turned off SIP ALG. Thanks
Yeah factory reset the phone, re-provisioned a couple of times. Updated to the latest firmware 96.86.0.81 (had that issue before). But it's had a few attempts now so it's probably blacklisted it again :rolleyes:
Oh interesting that you can on a pro license. I would just like to get the thing actually working (like it was before!) We are only a small company with 8 employees so we don't need extra extensions.... I'll wait it out for now.... if it still doesn't work then I'll have to have a look at it...
Very frustrating. I've unregistered the phone for now. Going to have to leave it 24 hours to see if it is a blacklisting issue - really annoying you can't go in an remove an IP from a blacklist.....
Hi all,
I have recently purchased a Yealink T57w (not 54w in the title oops!) to use as a router phone. I have had this working sucsessfully. We recently switched broadband providers and changed router etc.. and the internet connection is all online and working, however this T57w will not...