Search results

  1. Patton SN4114 FXO Gateway Setup Problems

    I have tested the PSTN Line and it's working fine when I use an analogue phone to make a call and receive a call. So it's not the Line problem. For audio issue, as I am a free plan user, I couldn't enable Call Recording. However, I did test and two way audio could reach the PBX by an internal...

  2. Patton SN4114 FXO Gateway Setup Problems

    This is the incoming call log with just one way audio. 3CX android extension can hear from the incoming caller but the incoming caller cannot hear from the 3CX android extension.

  3. Patton SN4114 FXO Gateway Setup Problems

    The above is the log for one failed outgoing call. Toneset is correct and Dail Delay has been set to 5 seconds. The error message was Service Unavailable

  4. Patton SN4114 FXO Gateway Setup Problems

    11/17/2021 11:29:53 PM - Added leg L:20.2[Line:10000>>*PHONE NO. REDACTED*] <-> L:20.1[Extn:10] 11/17/2021 11:29:53 PM - [Flow] Call(C:20): making call from L:20.1[Extn:10] to T:Line:10000>>*PHONE NO. REDACTED*@[Dev:sip:[email protected]:5060] 11/17/2021 11:29:53 PM - [CM503027]: Call(C:20)...

  5. Patton SN4114 FXO Gateway Setup Problems

    11/17/2021 11:30:09 PM - Default best-route IP is determined as 10.10.10.18 11/17/2021 11:29:59 PM - Updating device Dev(1285845732):[sip:[email protected]:5483;rinstance=fe5f980e452fee09 / 70] by message: DevUpd Recv Req REGISTER from 127.0.0.1:5483 tid=d6e49a0677b19235...

  6. Patton SN4114 FXO Gateway Setup Problems

    Yes. The echo test working fine. In fact I have several extensions and they can call each other and the audio are great without any issue for months since I setup it. Sometimes both extension are in the same LAN, sometimes both are over mobile data, they all works. So it shouldn't be the problem...

  7. Patton SN4114 FXO Gateway Setup Problems

    Dear members, I have recently purchased a Patton SN4114. My settings are as below:- Self hosted - 3CX PBX (10.10.10.18) - Passed all firewall check in 3cx, using 3cx STUN, extensions with 3CX android app Patton SN4114 (10.30.10.9) - Connected via VPN, Successfully Provisioned with 3cx config...

  8. V16.7.8.121 - Phone not ringing during standby & Incoming calls notification setting kept being turned off

    • Launch the 3CX Android App and go to "Menu >> Advanced" and disable the "Car/Bluetooth (Telecom API)" option. If it is already disabled, enable it again and try making a call again. Also try enabling "Incoming Call notifications" too. - Tried for both setting. It's the same, phone not ringing...

  9. V16.7.8.121 - Phone not ringing during standby & Incoming calls notification setting kept being turned off

    Phone Model: [Xiaomi Mi 10] Android Version: [Android 11] App Version: [16.7.8.121] 3CX PBX Version: [18.0.1880] / [Debian] Network Connection: [WiFi] / [IPv4] Client is on the same network as the PBX or not? Yes I realised there is a problem of phone not ringing when it's in standby mode...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom