Search results

  1. Implemented 3CX mobile Client - Roaming 4G/WIFI

    As mentioned before 3CX clients use the tunnel protocol. Sending the sip and rtp traffic thru the tunnel solves most of the rtp, NAT etc. problems. It should be relatively easy to enhance the tunnel implementation in a way that it supports the change of IP-addresses and networks. P.S. IMHO the...

  2. v16 Linux Firewall best practice

    We have switched our 3cx pbx from Windows to the official 3cx Debian iso. After the setup I checket iptables configuration and saw that it contains some preset rules. Unfortunately many of the rules make no sense to me. Examples: Duplicate entries Destination sip.mcast.net in INCOMMING chain...

  3. Multiple Trunks help

    Hi John, Thank you for your fast reply. I am aware of the mentioned document and I went thru it several times. What I was finally trying was to identify the trunks by the host part of the contact fields, with no success. In the meantime I have been able to make it work. The solution was to...

  4. Multiple Trunks help

    I have a hard time getting multiple trunks to work. All of my approaches have failed so far. Thus it it time to ask for help. My settup is as follows: Trunk 1: SIP Provider with registration Trunk 2: Second SIP PBX, IP-Based without registration Outgoing calls are working fine, incomming...

  5. Trunk to trunk port forwarding

    Done. Results still the same. In the meantime I have found the following document: https://www.3cx.com/docs/sip-trunk-inbound-calls/ With call source identification set to map from:user-part to authentication-id I was able to reach the right trunk. Now, incomming calls to outbound numbers...

  6. Trunk to trunk port forwarding

    Thank you for the answers. @JohnS_3CX I have configured a bridge as described in the Asterisk example. Working for internal calls but still not for outbound calls. Additionally, using the bridge cause problems with caller-id, since the legacy pbx does not support remote-party-id (supported are...

  7. Trunk to trunk port forwarding

    Hi, Our 3CX pbx has a trunk which is connected to a public sip provider and a second trunk which is connected to our legacy pbx. Public calls from 3CX clients are working, as well as internal calls between 3cx and the legacy pbx in both directions. What I am trying to setup now is that public...

  8. OPUS codec support and usability in v15.5

    @YiannisH_3CX Thank you for the hint to "chrome://webrtc-internals/" Since we have a mixed experience with webclient audio quality I have started a debug session with it. What I have figured out so far is that the call leg of the caller uses opus and the call leg of the callee uses PCMA...

  9. Provisioning QR-Code Problem

    Firewall check is ok. Yes. phones are provisioned remotely. This is working fine by using the email attached config files. The only thing that does not work is the qr-code provisioning. We are using split dns entries and resolving works fine. The only problem as already mentioned is that both...

  10. 3CX v16 Reloaded: Alpha 2 Lands

    Since your are greatly improving the look and feel of the webclient in v16 I would appreciate if https://www.3cx.com/community/threads/webclient-phonebook-improvements.62135/ could be addressed as well.

  11. Provisioning QR-Code Problem

    In our setup, the qr-code provisioning of 3cx-clients does not work. The problem is the hostname of the encoded link. It seems that the hostname is hardcoded to the hostname of the server. This does not work for us since we use a common dns name for the 3cx service. Example: Server-hostname...

  12. Webclient phonebook improvements

    The usability of the webclient search function is very limited because: - One line per contact and number without showing the type of number. - Missing company name. As an example I have created two contacts: Contact 1: FirstName: John LastName: Doe Company: ACME A Contact 2...
    • B.Fluehmann
    • Thread
    • contacts extension changes webclient photos
    • Replies: 7
    • Forum: Server

  13. Implemented 3CX mobile Client - Roaming 4G/WIFI

    As far as I know, the mobile clients already use a proprietary protocol. They connect to the pbx by using 3CX tunnels.

  14. Simple HTTP API

    Looking at the crm rest api you are right. I am referring to the new ones to come as mentioned by Nick Galea

  15. Simple HTTP API

    You may find some answers here: https://www.3cx.com/community/threads/3cx-phone-client-for-linux.49009/

  16. 3CX phone client for Linux

    @Nick Galea Very good news! Could you please share more details on the new apis you have mentioned? And please let me know how to access the CRM REST API you are mentioning. Right now I have started a GOlang client project which uses the existing "JSON/REST" api used by the admin GUI. I have...

  17. Additional Contact Fields

    Please add the following fields to contacts (Phonebook and Extensions) - Field with additional name info (initials/shortname/nickname or similar) - Department This would help in situations with multiple contacts with the same names. Our current workaround is to somehow misuse the name and...

  18. Rejected Provision OpenStage Phones from Unify

    @Nick Galea We are using mostly OpenStage 15 and some older models. I would like to help youas well. Feel free to contact me if you are interested. Regards Bernhard

  19. 3CX-OpenERP (Odoo) integration

    Hi Nick, Thank you for your answer. No hurry. Looking forward to see the results.

  20. 3CX v15.5 Update 2 Brings QR Codes, Hotdesking, CRM Integration and More

    Short question. SP2 is missing in the updates tab of my Admin UI. It says that I am up to date. I am on 15.5.3849.1 Do I have to update manually?
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom