I setup a Grandstream phone with the extension but now it doesn't ring on the web and on the Windows app
how can I set it up so it will ring on the Windows app, web, and phone simultaneously?
There seems to be an issue with the 3CX systems sending Grandstream RPS requests.
It was working fine until yesterday, then whenever you save settings for a user that has a Granstream handset assigned, the system hangs until you finally get the message below:
The following message then...
Hello,
how i can make a sip trunk between 3cx and grandstream?
the fxo line is on grandstream and some users is on it so need to make the users on 3cx can use the fxo lines on grandstream and can contact the users that is on grandstream.
thanks.
Just purchased and set up a Grandstream GSC3510 for an paging/announcements. It's not loud enough at all. I believe I have it turned to max volume. Is there any other settings I can change to make it louder? It's really not effective at all.
If not, what's a good device that I should purchase...
Hi,
We currently have a GDS3710 video door bell which works perfectly and have not purchased a GDS3702 for the goods in door. I have connected this to the network and the unit shows in the 3CX management console but when I select it I only have the option to "Reject" the device and not assign...
Hi,
i would like to know how can i add in 3CX provision a secondary SIP server in case the main SIP fails,
i can add it manually on grandstream 2130 but obviously i wanna make it under provision;
thanks.
Hello guys,
we are using 3CX pbx and currently getting rid of the deskphones and replacing them by USB headsets, we picked Grandstream GUV3000 as a suitable solution for our business, but there is one thing which a bit degrading it. On the cable there is controller for adjusting volume, mic...
I am wondering if 3CX supports a particular feature when it comes to call forwarding.
I know that it will support changing the profile status and then configuring the forwarding rules of that profile status to forward to an external number.
Is there a way to dial a code then enter any...
Hello,
I was having trouble provisioning a Grandstream DP715 under 3CX version 16
Here is the solution that I found.
I was able to install the 3CX templates from Grandstream as described in those 2 threads :
https://www.3cx.com/community/threads/grandstream-dp750.55041/...
We're having an issue where all of our extensions unregister and re-register all at the same time.
We're using a variety of Yealink, Polycom and Grandstream phones with a variety of different connection methods including Direct SIP, Local LAN, etc.
Doesn't matter what phone or connection...
Hi,
I created the call flow app everything work as expected.
but when assign app.Main to BLF and trying to transfer I got "No dial plan rules matched"
My phone is GrandStream gxp1628 latest firmware 1.0.4.132
Default dial plan { [*#x]+ | \S\Px | \S\Pxx | \S\Pxxx }
refer to this thread...
In the 3cx portal you can select on Grandstream
Configure Default Ring
Configure Queue Ringtone
Most calls seem to really Trigger the "external" Ringtone
Can a drop down be added to control the "External"
<P1489>2</P1489> <-------- Value
There are a bunch of other post with references to...
Hello,
3CX noob here. I'm having issues configuring my new Grandstream GXW4104. I can get outbound calls to work, but for the life of me I can't figure out how to get the inbound calls to work properly. I've spent 2 days trying different things, tried several configuration guides, read the...
Hi Guys,
I have a 3cx system with GrandSteam GXP2170.
I am looking a way when a user is on DND mode ,the other phones to see this user as busy with the led to be red.
Is it a way to do this?
Thank you