spa112

  1. SPA112 - Cloud hosted 3CX provisioning issues

    Good morning, We are having a terrible time trying to get these SPA112's to provision on our cloud hosted 3CX server. I have read several forum posts but I am still at a loss. I know the SPA112 isn't officially supported by 3CX but by judging what I have read, people are still able to get it to...

  2. SPA112, Cloud PBX, can receive calls, but "call rejected" when initiating calls to extensions/outside numbers

    So I realize the Cisco SPA112 is not officially supported but appreciate any recommendations / help IP and Names changed, but you get the picture and critical information I have a CLOUD hosted PBX (trial) at this point. (Standard Annual 15.5.15502.6) REF > [email protected] This...

  3. Cisco SPA112 can't dial out

    I tried to use this adapter to connect a Fax to 3CX. Incoming Calls no problem but when dialing out any digit seems to be ignored by the pbx. I fixed that by using an older model (PAP2T) which works out of the box with no problems. I read in the forum that the SPA112 worked also out of the box...

  4. Faxes are blank?

    I have an HP Photosmart 7520 connected to a Cisco SPA112 ATA. I have used this thread https://www.3cx.com/community/threads/3cx-and-cisco-spa112.53696/ to configure it. Outgoing fax reaches the destination and the cover page goes through, but the actual scanned document does not. Perhaps there...
  5. Matt Seymour

    3CX and Cisco SPA112

    Hi All, Has anyone had any experience setting up the Cisco SPA112 phone adapter. I have been trying to use the quick config wizard and it is locking the IP of the SPA out after too many failed authentication attempts. So far i have enabled the SPA, created an extension in 3CX and added the...
3CX Logo Footer Copyright © Sitemap Privacy
Top Bottom